我有在http://www.openchrome.org/找到設定的方法
照著做都有成功安裝，不過X-Window就是叫不起來
它的出錯訊息如下
- 代碼: 選擇全部
II) Wacom driver level: 47-0.7.2 $
(II) v4l driver for Video4Linux
(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
PM800/PM880/CN400
(II) Primary Device is: PCI 01:00:0
(EE) No devices detected.
Fatal server error:
no screens found
我是認為agp沒被載掛起來吧?!
dmesg內容如下(不好意思，有點長)
請各位幫忙看一下，3Q
- 代碼: 選擇全部
[17179569.184000] Linux version 2.6.15-27-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:35:20 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000017fb0000 (usable)
[17179569.184000] BIOS-e820: 0000000017fb0000 - 0000000017fbe000 (ACPI data)
[17179569.184000] BIOS-e820: 0000000017fbe000 - 0000000017fe0000 (ACPI NVS)
[17179569.184000] BIOS-e820: 0000000017fe0000 - 0000000018000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 383MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 98224
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 94128 pages, LIFO batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fa850
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x06000613 MSFT 0x00000097) @ 0x17fb0000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x06000613 MSFT 0x00000097) @ 0x17fb0200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x06000613 MSFT 0x00000097) @ 0x17fb0390
[17179569.184000] ACPI: MCFG (v001 A M I OEMMCFG 0x06000613 MSFT 0x00000097) @ 0x17fb03f0
[17179569.184000] ACPI: OEMB (v001 A M I AMI_OEM 0x06000613 MSFT 0x00000097) @ 0x17fbe040
[17179569.184000] ACPI: DSDT (v001 A0571 A0571000 0x00000000 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[17179569.184000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 2 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 18000000:e6c00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] mapped IOAPIC to ffffb000 (fecc0000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 1596.603 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.576000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.580000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)[17179570.588000] Memory: 377964k/392896k available (2103k kernel code, 14380k reserved, 599k data, 332k init, 0k highmem)
[17179570.588000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.668000] Calibrating delay using timer specific routine.. 3195.14 BogoMIPS (lpj=6390291)
[17179570.668000] Security Framework v1.0.0 initialized
[17179570.668000] SELinux: Disabled at boot.
[17179570.668000] Mount-cache hash table entries: 512
[17179570.668000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.668000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.668000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.668000] CPU: L2 Cache: 256K (64 bytes/line)
[17179570.668000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179570.668000] mtrr: v2.0 (20020519)
[17179570.668000] Enabling fast FPU save and restore... done.
[17179570.668000] Enabling unmasked SIMD FPU exception support... done.
[17179570.668000] Checking 'hlt' instruction... OK.
[17179570.684000] SMP alternatives: switching to UP code
[17179570.684000] checking if image is initramfs... it is
[17179571.308000] Freeing initrd memory: 6763k freed
[17179571.316000] ACPI: Looking for DSDT ... not found!
[17179571.320000] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[17179571.320000] Total of 1 processors activated (3195.14 BogoMIPS).
[17179571.320000] ENABLING IO-APIC IRQs
[17179571.320000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.464000] Brought up 1 CPUs
[17179571.464000] NET: Registered protocol family 16
[17179571.464000] EISA bus registered
[17179571.464000] ACPI: bus type pci registered
[17179571.464000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[17179571.464000] PCI: Using MMCONFIG
[17179571.464000] ACPI: Subsystem revision 20051216
[17179571.468000] ACPI: Interpreter enabled
[17179571.468000] ACPI: Using IOAPIC for interrupt routing
[17179571.472000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.472000] PCI: Probing PCI hardware (bus 00)
[17179571.476000] Boot video device is 0000:01:00.0
[17179571.476000] PCI: Transparent bridge - 0000:00:13.1
[17179571.476000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.504000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[17179571.508000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[17179571.508000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179571.508000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[17179571.508000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[17179571.508000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179571.508000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179571.508000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[17179571.508000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[17179571.508000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.508000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.508000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179571.508000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179571.508000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.508000] pnp: PnP ACPI init
[17179571.512000] pnp: PnP ACPI: found 14 devices
[17179571.512000] PnPBIOS: Disabled by ACPI PNP
[17179571.512000] PCI: Using ACPI for IRQ routing
[17179571.512000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.512000] PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
[17179571.516000] PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
[17179571.532000] pnp: 00:05: ioport range 0x290-0x297 has been reserved
[17179571.532000] PCI: Bridge: 0000:00:01.0
[17179571.532000] IO window: disabled.
[17179571.532000] MEM window: fa000000-fbdfffff
[17179571.532000] PREFETCH window: d0000000-dfffffff
[17179571.532000] PCI: Bridge: 0000:00:02.0
[17179571.532000] IO window: disabled.
[17179571.532000] MEM window: disabled.
[17179571.532000] PREFETCH window: disabled.
[17179571.532000] PCI: Bridge: 0000:00:03.0
[17179571.532000] IO window: disabled.
[17179571.532000] MEM window: disabled.
[17179571.532000] PREFETCH window: disabled.
[17179571.532000] PCI: Bridge: 0000:00:13.0
[17179571.532000] IO window: disabled.
[17179571.532000] MEM window: fbe00000-fbefffff
[17179571.532000] PREFETCH window: disabled.
[17179571.532000] PCI: Bridge: 0000:00:13.1
[17179571.532000] IO window: disabled.
[17179571.532000] MEM window: fbf00000-fbffffff
[17179571.532000] PREFETCH window: disabled.
[17179571.532000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.532000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
[17179571.532000] PCI: Via IRQ fixup for 0000:00:02.0, from 10 to 9
[17179571.532000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179571.532000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
[17179571.532000] PCI: Via IRQ fixup for 0000:00:03.0, from 10 to 1
[17179571.532000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[17179571.532000] PCI: Setting latency timer of device 0000:00:13.0 to 64
[17179571.532000] PCI: Setting latency timer of device 0000:00:13.1 to 64
[17179571.532000] audit: initializing netlink socket (disabled)
[17179571.532000] audit(1160119667.528:1): initialized
[17179571.532000] VFS: Disk quotas dquot_6.5.1
[17179571.532000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.532000] Initializing Cryptographic API
[17179571.532000] io scheduler noop registered
[17179571.532000] io scheduler anticipatory registered
[17179571.532000] io scheduler deadline registered
[17179571.532000] io scheduler cfq registered
[17179571.532000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
[17179571.532000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179571.532000] assign_interrupt_mode Found MSI capability
[17179571.532000] Allocate Port Service[pcie00]
[17179571.532000] Allocate Port Service[pcie01]
[17179571.532000] Allocate Port Service[pcie02]
[17179571.532000] Allocate Port Service[pcie03]
[17179571.532000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
[17179571.532000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[17179571.532000] assign_interrupt_mode Found MSI capability
[17179571.532000] Allocate Port Service[pcie00]
[17179571.536000] Allocate Port Service[pcie01]
[17179571.536000] Allocate Port Service[pcie02]
[17179571.536000] Allocate Port Service[pcie03]
[17179571.536000] isapnp: Scanning for PnP cards...
[17179571.888000] isapnp: No Plug & Play device found
[17179571.900000] Real Time Clock Driver v1.12
[17179571.900000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179571.900000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.900000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.904000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179571.904000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.904000] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.904000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.904000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.904000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.904000] mice: PS/2 mouse device common for all mice
[17179571.904000] EISA: Probing bus 0 at eisa.0
[17179571.904000] EISA: Detected 0 cards.
[17179571.904000] NET: Registered protocol family 2
[17179571.932000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.940000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179571.940000] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[17179571.940000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[17179571.940000] TCP: Hash tables configured (established 16384 bind 16384)
[17179571.940000] TCP reno registered
[17179571.940000] TCP bic registered
[17179571.940000] NET: Registered protocol family 1
[17179571.940000] NET: Registered protocol family 8
[17179571.940000] NET: Registered protocol family 20
[17179571.940000] Using IPI No-Shortcut mode
[17179571.940000] ACPI wakeup devices:
[17179571.940000] PCI0 PS2K PS2M UAR2 USB1 USB2 USB3 USB4 ILAN PCI1 PCI2 PWRB
[17179571.940000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.940000] Freeing unused kernel memory: 332k freed
[17179571.988000] vga16fb: initializing
[17179571.988000] vga16fb: mapped to 0xc00a0000
[17179572.152000] Console: switching to colour frame buffer device 80x25
[17179572.152000] fb0: VGA16 VGA frame buffer device
[17179573.272000] Capability LSM initialized
[17179573.308000] ACPI: Processor [CPU1] (supports 16 throttling states)
[17179573.880000] SCSI subsystem initialized
[17179573.880000] ACPI: bus type scsi registered
[17179573.880000] libata version 1.20 loaded.
[17179573.884000] sata_via 0000:00:0f.0: version 1.1
[17179573.884000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 209
[17179573.884000] PCI: Via IRQ fixup for 0000:00:0f.0, from 5 to 1
[17179573.884000] sata_via 0000:00:0f.0: routed to hard irq line 1
[17179573.884000] ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 209
[17179573.884000] ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 209
[17179575.104000] scsi0 : sata_via
[17179576.324000] scsi1 : sata_via
[17179576.344000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179576.344000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 0
[17179576.344000] VP_IDE: chipset revision 7
[17179576.344000] VP_IDE: not 100% native mode: will probe irqs later
[17179576.344000] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179576.344000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[17179576.344000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
[17179576.344000] Probing IDE interface ide0...
[17179576.772000] hda: ST3160812A, ATA DISK drive
[17179577.448000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179577.448000] Probing IDE interface ide1...
[17179578.604000] hdd: 32X12X48 CD-RW 1.10 20020301, ATAPI CD/DVD-ROM drive
[17179578.664000] ide1 at 0x170-0x177,0x376 on irq 15
[17179578.668000] hda: max request size: 1024KiB
[17179578.712000] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[17179578.736000] hda: cache flushes supported
[17179578.736000] hda: hda1 hda2 hda3 < hda5 >
[17179578.780000] hdd: ATAPI 48X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
[17179578.780000] Uniform CD-ROM driver Revision: 3.20
[17179579.364000] usbcore: registered new driver usbfs
[17179579.368000] usbcore: registered new driver hub
[17179579.368000] USB Universal Host Controller Interface driver v2.3
[17179579.368000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179579.368000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
[17179579.368000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179579.372000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179579.372000] uhci_hcd 0000:00:10.0: irq 217, io base 0x0000c800
[17179579.372000] hub 1-0:1.0: USB hub found
[17179579.372000] hub 1-0:1.0: 2 ports detected
[17179579.480000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 225
[17179579.480000] PCI: Via IRQ fixup for 0000:00:10.1, from 5 to 1
[17179579.480000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179579.480000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179579.480000] uhci_hcd 0000:00:10.1: irq 225, io base 0x0000c400
[17179579.480000] hub 2-0:1.0: USB hub found
[17179579.480000] hub 2-0:1.0: 2 ports detected
[17179579.588000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 209
[17179579.588000] PCI: Via IRQ fixup for 0000:00:10.2, from 4 to 1
[17179579.588000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179579.588000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179579.588000] uhci_hcd 0000:00:10.2: irq 209, io base 0x0000c000
[17179579.588000] hub 3-0:1.0: USB hub found
[17179579.588000] hub 3-0:1.0: 2 ports detected
[17179579.696000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 233
[17179579.696000] PCI: Via IRQ fixup for 0000:00:10.3, from 6 to 9
[17179579.696000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179579.696000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179579.696000] uhci_hcd 0000:00:10.3: irq 233, io base 0x0000b800
[17179579.696000] hub 4-0:1.0: USB hub found
[17179579.696000] hub 4-0:1.0: 2 ports detected
[17179579.804000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 209
[17179579.804000] PCI: Via IRQ fixup for 0000:00:10.4, from 4 to 1
[17179579.804000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179579.804000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179579.804000] ehci_hcd 0000:00:10.4: irq 209, io mem 0xf9fffc00
[17179579.804000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179579.804000] hub 5-0:1.0: USB hub found
[17179579.804000] hub 5-0:1.0: 8 ports detected
[17179579.848000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[17179580.068000] EXT3-fs: mounted filesystem with ordered data mode.
[17179580.084000] kjournald starting. Commit interval 5 seconds
[17179581.304000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[17179581.692000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[17179587.152000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179587.152000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179587.644000] Linux video capture interface: v1.00
[17179587.664000] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b
[17179587.840000] usbcore: registered new driver spca5xx
[17179587.840000] drivers/usb/media/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered
[17179588.116000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179588.116000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 233
[17179588.116000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 9
[17179588.120000] eth0: VIA Rhine II at 0x1b400, 00:17:31:b2:bd:0d, IRQ 233.
[17179588.120000] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[17179588.320000] input: PC Speaker as /class/input/input1
[17179588.324000] drivers/usb/net/atmel/at76_usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.12beta23-fw_dwl loading
[17179588.328000] drivers/usb/net/atmel/at76c503.c: Generic Atmel at76c503/at76c505 routines v0.12beta23-fw_dwl
[17179588.328000] drivers/usb/net/atmel/at76c503-fw_skel.c: Atmel at76c503 (i3861) Wireless LAN Driver v0.12beta23-fw_dwl loading
[17179588.328000] drivers/usb/net/atmel/at76c503-fw_skel.c: downloading firmware atmel_at76c503-i3861.bin
[17179588.508000] parport: PnPBIOS parport detected.
[17179588.508000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179588.740000] drivers/usb/net/atmel/at76c503-fw_skel.c: got it.
[17179588.740000] usbcore: registered new driver at76c503-i3861
[17179588.784000] drivers/usb/net/atmel/at76c503.c: $Id: at76c503.c,v 1.74 2005/03/08 01:33:14 jal2 Exp $ compiled Sep 16 2006 02:49:06
[17179588.784000] drivers/usb/net/atmel/at76c503.c: firmware version 0.90.0 #44 (fcs_len 4)
[17179588.784000] drivers/usb/net/atmel/at76c503.c: device's MAC 00:03:9d:48:32:2c, regulatory domain FCC (U.S) (id 16)
[17179588.784000] drivers/usb/net/atmel/at76c503.c: registered wlan0
[17179588.904000] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 50
[17179588.904000] PCI: Via IRQ fixup for 0000:04:01.0, from 5 to 2
[17179588.904000] PCI: Setting latency timer of device 0000:04:01.0 to 64
[17179589.000000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179589.348000] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 16 (level, low) -> IRQ 58
[17179589.348000] saa7130[0]: found at 0000:05:06.0, rev: 1, irq: 58, latency: 64, mmio: 0xfbfffc00
[17179589.348000] saa7130[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO2000 [card=3,insmod option]
[17179589.348000] saa7130[0]: board init: gpio is 38000
[17179589.348000] saa7130[0]: there are different flyvideo cards with different tuners
[17179589.348000] saa7130[0]: out there, you might have to use the tuner=<nr> insmod
[17179589.348000] saa7130[0]: option to override the default value.
[17179589.348000] input: saa7134 IR (LifeView FlyVIDEO20 as /class/input/input2
[17179589.408000] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[17179589.436000] ts: Compaq touchscreen protocol output
[17179589.492000] saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
[17179589.492000] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.492000] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.492000] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.492000] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.492000] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.492000] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.492000] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.580000] tuner 0-0061: chip found @ 0xc2 (saa7130[0])
[17179589.584000] tuner 0-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
[17179589.584000] saa7130[0]: registered device video1 [v4l2]
[17179589.584000] saa7130[0]: registered device vbi1
[17179589.584000] saa7130[0]: registered device radio1
[17179589.596000] saa7134 ALSA driver for DMA sound loaded
[17179589.596000] saa7130[0]/alsa: saa7130[0] at 0xfbfffc00 irq 58 registered as card 1
[17179590.048000] NET: Registered protocol family 17
[17179590.064000] lp0: using parport0 (interrupt-driven).
[17179590.096000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.136000] [drm] Initialized drm 1.0.1 20051102
[17179590.316000] EXT3 FS on hda2, internal journal
[17179590.460000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179590.460000] md: bitmap version 4.39
[17179590.864000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179591.460000] cdrom: open failed.
[17179594.552000] NET: Registered protocol family 10
[17179594.552000] lo: Disabled Privacy Extensions
[17179594.552000] IPv6 over IPv4 tunneling driver
[17179596.620000] ACPI: Power Button (FF) [PWRF]
[17179596.620000] ACPI: Power Button (CM) [PWRB]
[17179596.716000] ibm_acpi: ec object not found
[17179596.744000] pcc_acpi: loading...
[17179597.216000] powernow-k8: Power state transitions not supported
[17179600.120000] ppdev: user-space parallel port driver
[17179600.356000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179600.356000] apm: overridden by ACPI.
[17179601.140000] wlan0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
[17179603.472000] Bluetooth: Core ver 2.8
[17179603.472000] NET: Registered protocol family 31
[17179603.472000] Bluetooth: HCI device and connection manager initialized
[17179603.472000] Bluetooth: HCI socket layer initialized
[17179603.492000] Bluetooth: L2CAP ver 2.8
[17179603.492000] Bluetooth: L2CAP socket layer initialized
[17179603.496000] Bluetooth: RFCOMM socket layer initialized
[17179603.496000] Bluetooth: RFCOMM TTY layer initialized
[17179603.496000] Bluetooth: RFCOMM ver 1.7
[17179604.716000] wlan0: no IPv6 routers present
[17179943.708000] hda-intel: Invalid position buffer, using LPIB read method instead.
