[問題]kde無法開啟

[lung88]

各位大大
小弟的kde無法開啟
好像是跟字形檔有關
請問各位大大該怎麼解決?
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
PEXExtensionInit: Couldn't open default PEX font file Roman_M
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"

[阿信]

/etc/X11/XF86Config-4，和debian的環境能否post出來呢？

感覺上不像是 font的問題窩...

[lung88]

Section "Files"
#FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "nv"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-70
VertRefresh 50-160
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

### END DEBCONF SECTION

[lung88]

/etc/X11/XF86Config-4，和debian的環境能否post出來呢？

debian的環境<=這是指甚麼呢?
上面是我的XF86Config-4
麻煩大大了

[阿信]

debian的環境<=這是指甚麼呢?
上面是我的XF86Config-4
麻煩大大了

嗯...弟是只 stable or testing or unstable

我想問題很好解決，因為無痛起步有說明了

http://people.debian.org.tw/~moto/topics/my_articles/Debian-Tutorial/Debian-Install-Guide.html#toc8.2

請看中文字型的部份吧，其餘的資訊請多用收尋吧...

[lung88]

debian的環境<=這是指甚麼呢?
上面是我的XF86Config-4
麻煩大大了

嗯...弟是只 stable or testing or unstable

我想問題很好解決，因為無痛起步有說明了

http://people.debian.org.tw/~moto/topics/my_articles/Debian-Tutorial/Debian-Install-Guide.html#toc8.2

請看中文字型的部份吧，其餘的資訊請多用收尋吧...

好像不是中文字型的關係耶
PEXExtensionInit: Couldn′t open default PEX font file Roman_M
這是甚麼問題呢?
我快投降了

[阿信]

把 Load "pex5" 註解掉吧，應該用不到

[lung88]

找到問題了
這個問題原來很多人遇過
只要在.xinitrc
加入exec startkde就可以了
感謝大大的協助
肛溫阿~

[阿信]

找到問題了
這個問題原來很多人遇過
只要在.xinitrc
加入exec startkde就可以了
感謝大大的協助
肛溫阿~

...原來我重頭到尾都會錯意了...看來我要檢討了...