請問一下安裝觸控螢幕的問題..(我裝不起來，請大家幫我看看@@)

[Prochihua]

我那台Table PC的硬體資料：
Processor: Transmeta Crusoe TM3200 at 400MHz

Memory: 64MB on-board; expandable to 192MB

Storage: 64MB Compact Flash; expandable to 256MB

Display: 10.4-inch full-color TFT LCD, 800 x 600 pixels

Video: SMI SM712 with integrated 2MB VRAM

Audio: Sound Blaster Pro 3.01, 16-bit PCM sound source

Communications: integrated 802.11b wireless

I/O Ports: two USB, two PCMCIA Type II slots, internal MiniPCI Type III module position

Operating System: Midori Linux (can also support Microsoft Windows)

Size: 11.0 x 8.7 x 1.0 in.

Weight: 2.6 lb.

Regulatory: FCC class B, UL, VCCI, JATE, T-mark, UL1604 compliant

Interoperability: Wireless LAN ready, supports both thin and thick client connectivity

Power: rechargeable Lithium ion battery

Accessories: docking cradle, protective grip

它是用一張CF卡當成硬碟使用
我外接了USB-HD，然後裝上Debian
(sarge-net-install.iso
kernel:2.4.25)
我看了一下關於安裝觸控螢幕的文件
裏面需要指定modules，但是我不曉得要指定什麼Driver給它
所以就把這台機器原先附的Midori Linux CF卡給mount起來
但是只有一個partition可以用ext2 mount得起來
其他我就搞不定..
在mount起來的那個partition裏面發現xinit
裏面有一行：
/usr/X11R6/bin/xtouch --xmin 210 --xmax 3868 --ymin 345 --ymax 3860
不過由於/usr/X11R6這個目錄找不到
(應該是在我mount 不起來的其他partition中吧@@)
再附上我的dmesg 請大家幫我看一下..謝謝
Linux version 2.4.25-1-386 (herbert@gondolin) (gcc version 3.3.2 (Debian)) #1 Tue Feb 24 08:11:13 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
BIOS-e820: 000000000009b400 - 000000000009c000 (reserved)
BIOS-e820: 00000000000e8800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000012ff0000 (usable)
BIOS-e820: 0000000012ff0000 - 0000000012fffc00 (ACPI data)
BIOS-e820: 0000000012fffc00 - 0000000013000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
303MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 77808
zone(0): 4096 pages.
zone(1): 73712 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 HTCLTD ) @ 0x000f8260
ACPI: RSDT (v001 HTCLTD HTC20F1 0x06040003 LTP 0x00000000) @ 0x12ffc9a9
ACPI: FADT (v001 HTCLTD HTC20F1 0x06040003 PTL 0x000f4240) @ 0x12fffb8c
ACPI: DSDT (v001 HTCLTD HTC20F1 0x06040003 MSFT 0x0100000b) @ 0x00000000
Kernel command line: ramdisk_size=100000 vga=normal initrd=minisys.gz root=/dev/sda1 BOOT_IMAGE=vmlinuz
No local APIC present or hardware disabled
Initializing CPU#0
Detected 397.902 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 522.64 BogoMIPS
Memory: 302492k/311232k available (1079k kernel code, 8336k reserved, 465k data, 92k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 32K (32 bytes/line)
CPU: Processor revision 1.1.0.2, 400 MHz
CPU: Code Morphing Software revision 3.0.9-4-886
CPU: 20010118 20:11 official build cand-3.0.9#1
CPU serial number disabled.
CPU: After generic, caps: 0080813f 0081813f 00000000 00000000
CPU: Common caps: 0080813f 0081813f 00000000 00000000
CPU: Transmeta(tm) Crusoe(tm) Processor stepping 02
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20040116
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfd8be, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 3041k freed
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 9 for device 00:14.0
usb-ohci.c: USB OHCI at membase 0xc00d0000, IRQ 9
usb-ohci.c: usb-00:14.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbkbd
usbkbd.c: :USB HID Boot Protocol keyboard driver
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
mice: PS/2 mouse device common for all mice
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem driver Revision: 1.00
hub.c: new USB device 00:14.0-1, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
hub.c: new USB device 00:14.0-2, assigned address 3
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: HITACHI_ Model: DK238A-43 Rev: 0811
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 8452080 512-byte hdwr sectors (4327 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 >
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
hub.c: new USB device 00:14.0-1.1, assigned address 4
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Datafab Model: KECF-USB Rev: 0113
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0
SCSI device sdb: 125185 512-byte hdwr sectors (64 MB)
sdb: test WP failed, assume Write Enabled
/dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 >
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
hub.c: new USB device 00:14.0-1.2, assigned address 5
input0: CHESEN USB Keyboard on usb1:5.0
input: USB HID v1.10 Mouse [CHESEN USB Keyboard] on usb1:5.1
hub.c: new USB device 00:14.0-1.4, assigned address 6
input2: Adomax Sem. USB Mouse on usb1:6.0
EXT2-fs warning (device sd(8,1)): ext2_read_super: mounting ext3 filesystem as ext2

VFS: Mounted root (ext2 filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 92k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 211812k swap-space (priority -1)
Real Time Clock Driver v1.10f
hda: , CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
lp: driver loaded but no devices found
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 9 for device 00:0c.0
PCI: Sharing IRQ 9 with 00:0c.1
PCI: Found IRQ 9 for device 00:0c.1
PCI: Sharing IRQ 9 with 00:0c.0
spurious 8259A interrupt: IRQ7.
Yenta ISA IRQ mask 0x08f8, PCI irq 9
Socket status: 30000020
Yenta ISA IRQ mask 0x0cf8, PCI irq 9
Socket status: 30000006
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 09:04:10 Feb 24 2004
PCI: Found IRQ 11 for device 00:04.0
trident: ALi Audio Accelerator found at IO 0x1000, IRQ 11
ac97_codec: AC97 codec, id: (Unknown)
PCI: Found IRQ 11 for device 00:04.0
gameport0: ALi Corporation M5451 PCI AC-Link Controller Audio Device at pci00:04.0 speed 2711 kHz
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 09:07:29 Feb 24 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x260-0x267 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_alloc(bus 1): vendor 0x10ec, device 0x8139
PCI: Enabling device 01:00.0 (0000 -> 0003)
8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003)
8139cp: pci dev 01:00.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
8139too Fast Ethernet driver 0.9.26
PCI: Setting latency timer of device 01:00.0 to 64
eth0: RealTek RTL8139 at 0xd3910000, 00:10:60:73:cd:01, IRQ 9
eth0: Identified 8139 chip type 'RTL-8139C'
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
PPP BSD Compression module registered
PPP Deflate Compression module registered