重新開機後無法進入gnome, error msg大概是
- 代碼: 選擇全部
nvidia_drv.o is unresolved
我想說nvidia_drv是nvidia-glx連的東西, 於是再用apt-build把他抓下來rebuild
rebuild+install後重開機, 出現不一樣的error msg(init 5):
- 代碼: 選擇全部
(II) Primary Device is: PCI 01:00:0
(EE) No devices detected.
Fatal server error:
no screens found
打startx後出現的error msg:
- 代碼: 選擇全部
XXIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian (static) 4.3.0-7 20040430045132 root@system.mt)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.6-rc2 i686 [ELF]
Build Date: 30 April 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
OS Kernel: Linux version 2.6.6-rc2 (root@mt) (gcc version 3.3.3 (Debian 20040401)) #1 Fri Apr 30 20:42:21 CST 2004 T
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Apr 30 22:22:55 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(EE) No devices detected.
Fatal server error:
no screens found
這是我的XF86Config-4:
- 代碼: 選擇全部
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
# RgbPath "/usr/X11R6/lib/X11/rgb"
# FontPath "unix/:7100" # local font server
FontPath "unix/:7110" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/TrueType"
# FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
# FontPath "/usr/lib/X11/fonts/CID"
# FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi"
# FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "/usr/lib/X11/fonts/misc/:unscaled"
EndSection
Section "Module"
# Load "xtt"
Load "xfs-xtt"
Load "bitmap"
Load "dbe"
Load "ddc"
# Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
# Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
# Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
# Option "SendCoreEvents" "true"
# Option "Device" "/dev/psaux"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
Option "Resolution" "3000"
Option "Buttons" "7"
EndSection
#Section "InputDevice"
# Identifier "Generic Mouse"
# Driver "mouse"
# Option "SendCoreEvents" "true"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ImPS/2"
# Option "Emulate3Buttons" "true"
# Option "ZAxisMapping" "4 5"
#EndSection
Section "Device"
Identifier "nVidia GeForce Ti 4200"
Driver "nvidia"
BusID "PCI:01:00:00"
VideoRam 65536
################################################
Option "NvAGP" "1" # Default: 3
Option "NoLogo" "1" # Default: 0
Option "NoFlip" "1" # Default: 0
Option "SWCursor" "0"
Option "HWCursor" "1"
Option "CursorShadow" "1" # Default: 0
Option "CursorShadowAlpha" "64" # Default: 64
Option "CursorShadowXOffset" "4" # Default: 4
Option "CursorShadowYOffset" "2" # Default: 2
Option "NoBandWidthTest" "1" # Default: 0
Option "MultisampleCompatibility" "1"
# Default: a singlemultisample
# buffer is shared between the front and back buffers.
Option "NoPowerConnectorCheck" "1"
# Default: the power connector test is performed.
##########################################
EndSection
Section "Monitor"
Identifier "Mitac T15EX"
HorizSync 45-60 # default: 28-50
VertRefresh 60-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia GeForce Ti 4200"
Monitor "Mitac T15EX"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
XF86Config-4沒有動到, 與之前正常時一樣
不過我有試一下, 把顯示卡區段的Driver "nvidia"改成"nv"就可以進gnome了, 改回nvidia就不行
我的debian是testing, kernel是2.6.6-rc2, nvidia-kernel是用apt-get抓下來compile的, 在rebuild xserver之前都正常地工作
請大大們罩一下, 我快瘋了
感謝
