目前狀況仍然是全黑...繼續找資料中
慶幸的是, 因為是 linux
所以其他部份都沒問題
對了, 附上我的 log
http://irenepcc.dyndns.org/~mt/archives ... 000750.php
繼續奮鬥...
Anonymous 寫:目前狀況仍然是全黑...繼續找資料中
慶幸的是, 因為是 linux
所以其他部份都沒問題
對了, 附上我的 log
http://irenepcc.dyndns.org/~mt/archives ... 000750.php
繼續奮鬥...
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(WW) NVIDIA(0): The user specified VertRefresh "43.000-72.000" has been
(WW) NVIDIA(0): adjusted to "50.000-72.000" (the intersection with
(WW) NVIDIA(0): EDID-specified VertRefresh "50.000-80.000"
(WW) (1600x1024,Generic Monitor) mode clock 106.91MHz exceeds DDC maximum 80MHz
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "1280x960" (width 1280 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "1280x1024" (width 1280 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "1152x768" (width 1152 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1024)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0): EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "640x512" (height 1024 is larger than
(WW) NVIDIA(0): EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "640x480" (height 960 is larger than
(WW) NVIDIA(0): EDID-specified maximum 768)
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
redjoe 寫:
建議:
先查出螢幕支援的頻率範圍,設定時自行指定,不要用自動抓的,
or 使用knoppix,B2D開機找出最佳設定
Anonymous 寫:redjoe 寫:
建議:
先查出螢幕支援的頻率範圍,設定時自行指定,不要用自動抓的,
or 使用knoppix,B2D開機找出最佳設定
感謝您的提醒, 我把 knoppix 啟動, 然後把他的 X 的設定檔留下來
果然可以用了
現在就只剩細部設定了
目前的狀況, 可以用了, 只是會有垂直線條式的"模糊", 我在"猜"應該是頻率的設定問題吧...
謝謝這幾天大家的幫忙...
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 24-80
VertRefresh 56-75
Option "DPMS"
EndSection
正在瀏覽這個版面的使用者:沒有註冊會員 和 1 位訪客