x-window with nvidia 的問題(努力爬文+亂試，還是失敗T_T)

[nxu]

以下是我的錯誤訊息：

skipping "/usr/X11R6/libmodules/extensions/libGLcore.a:m_debug_clip.o" : No symbols found
Skipping "/usr/X11R6/libmodules/extensions/libGlcore.a:m_debug_xform.o": NO symbols found
SKipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencod.o": No symbols found
(EE) Failed to load module "nvidia" (module does not exist , 0)
(EE) no drivers availabe.

Fatal server error :
no screens found
........................

以下是我的設定檔
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
#Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-65
VertRefresh 50-75
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

我是用以下方法產生module

apt-get install kernel-headers-2.6.8-2-686
cd /usr/src
tar zxvf nvidia-kernel-source.tar.gz
cd /usr/src/kernel-headers-2.6.8-2-686
make-kpkg modules_image
cd /usr/src
dpkg -i nvidia-kernel-2.6.8*_i686.deb

沒看到錯誤訊息
下modprobe也沒有錯誤訊息
lsmod時nvidia也有出現。

就是進不了 T_T

[d2207197]

nvidia-glx 呢？

[訪客]

幫 d2207197 翻譯一下:
請安裝 nvidia-glx 這樣才會有 nvidia 的 X server
你很明顯是根本沒安裝這玩意兒

nvidia 的 kernel module 和 X server 是不一樣的,
基本上不用自己掛載, 只要你的 X 是選 nvidia,
進 X 時就會自動掛載 nvidia 的 kernel module
(這年頭應該沒有人不用自動掛載的吧...)

[d2207197]

ㄜ～～～不是 nvidia 的 X server，是 nvidia 的 glx module

[訪客]

不只是 glx module 啊...

nvidia-glx 裡面有 /usr/X11R6/lib/modules/drivers/nvidia_drv.o
有這玩意兒才能用 nvidia, 不然只能用 nv

只安裝 nvidia-kernel 是毫無意義的...

[nxu]

幫 d2207197 翻譯一下:
請安裝 nvidia-glx 這樣才會有 nvidia 的 X server
你很明顯是根本沒安裝這玩意兒

nvidia 的 kernel module 和 X server 是不一樣的,
基本上不用自己掛載, 只要你的 X 是選 nvidia,
進 X 時就會自動掛載 nvidia 的 kernel module
(這年頭應該沒有人不用自動掛載的吧...)

我知，我po完文看到 d2207197前輩回時，我就裝好了，也確定可以開，只是這幾天沒時間上moto，@_@。

我那時因為 nvidia module 沒編成功！所以裝時敗，就忘了裝了@_@ sorry。

感謝各位的指導。