用mplayer 0.90rc3 重播電台節目問題

[pooh9038]

用mplayer重播電台節目不能選擇節目的位置,如下圖:

<img src="http://pooh9038.hypermart.net/mplayererror.jpg">


箭嘴的地方原應有推杆可供選擇節目的位置,而用realplayer播放同一節目時
位置可自由選擇.不過,同樣用mplayer播放vcd時推杆則正常出現.

其他的message如下:

pooh@debian:/tmp$ cat 20030202.asx
<asx version = "3.0">
<title>radio4 醉 人 音 樂</title>
<abstract></abstract>
<copyright>香港電台</copyright>
<author>香港電台</author>
<entry>
<title>radio4 醉 人 音 樂</title>
<abstract></abstract>
<copyright>香港電台</copyright>
<author>香港電台</author>
<STARTTIME VALUE="00:05:00" />
<DURATION VALUE="00:54:58" />
<ref href = "mms://202.123.216.118/rthk/radio4/20030202/2003020223.asf
"/>
</entry>
</asx>


pooh@debian:/tmp$ gmplayer mms://202.123.216.118/rthk/radio4/20030 ... 020223.asf
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/share/locale

MPlayer 0.90rc3-3.2.2 (C) 2000-2003 Arpad Gereoffy (see DOCS)

CPU: Advanced Micro Devices Duron SF Spitfire (Family: 6, Stepping: 1)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
3DNow supported but disabled
3DNowExt supported but disabled
CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX SSE

Reading config file /etc/mplayer/mplayer.conf
Reading config file /home/pooh/.mplayer/config
[cfg] read config file: /home/pooh/.mplayer/gui.conf
Reading config file /home/pooh/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 16 and 16 bpp (":0.0" => local display)
Reading /home/pooh/.mplayer/codecs.conf: can't open '/home/pooh/.mplayer/codecs.conf': 沒有此一檔案或目錄
Reading /etc/mplayer/codecs.conf: 49 audio & 130 video codecs
font: can't open file: /home/pooh/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Failed to open /dev/rtc: 拒絕不符權限的操作 (mplayer should be setuid root or /dev/rtc should be readable by the user.)
Using usleep() timing
Can't open input config file /home/pooh/.mplayer/input.conf : 沒有此一檔案或目錄
Input config file /etc/mplayer/input.conf parsed : 50 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : 拒絕不符權限的操作
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: 沒有此一檔案或目錄
Failed to open LIRC support.
You will not be able to use your remote control.
SKIN dir 1: '/home/pooh/.mplayer/Skin'
SKIN dir 2: '/usr/share/mplayer/Skin'

Playing mms://202.123.216.118/rthk/radio4/20030 ... 020223.asf
Connecting to server 202.123.216.118:80 ...
Connecting to server 202.123.216.118:80 ...
Cache size set to 1024 KBytes
Connected to server: 202.123.216.118
Cache fill: 19.53% (204800 bytes) ASF file format detected.
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 22050 Hz, 2 ch, 16 bit (0x10), ratio: 2503->88200 (20.0 kbit)
Selected audio codec: [ffwmav2] afm:ffmpeg (DivX audio v2 (ffmpeg))
==========================================================================
Checking audio filter chain for 22050Hz/2ch/16bit -> 22050Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 22050 hz, little endian signed int
AF_pre: 22050Hz 2ch Signed 16-bit (Little-Endian)
[pl_eq] Equalizer in use.
SDL: Samplerate: 22050Hz Channels: Stereo Format Signed 16-bit (Little-Endian)
AO: [plugin] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 22050Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Video: no video
Starting playback...
A: 45.4 1.3% 19%
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_ABOVE.
A: 145.0 1.3% 23%


看了mplayer的文件卻找不到解決的方法,不知各位有沒有遇過類似的問題?