apt-get upgrade 之後發生了一些問題

歡迎提問 debian desktop 相關問題,何謂 desktop ? 舉凡您日常生活會用到的部份,如上網 ( www 、 bbs ..) 、程式設計、繪圖...等等。 通常以 X Window 環境底下問題為主。

apt-get upgrade 之後發生了一些問題

文章win139 » 週二 8月 01, 2006 12:12 am

各位學長
小弟是 debian 的生手 (非新手)
依 "圖解 Debian 桌面入門" 的步驟安裝好gnome 之後
又自做主張的把 apt sources.list 中的 stable 改成 testing,
在 apt-get update -> apt-get upgrade 之後
gnome 中發生一些變化:
1. 應用程式選單並變成英文
ex. 偏好設定 -> Preferences; 系統 -> System
不過子選單倒是維持是中文的
2. xcin 裡酷音輸入法不見了

另外, 我如果升級核心 kernel-image & kernel-headers
新的核心在開機時好像無法辨識到 USB mouse & Keyboard 及 設定網卡

我搜尋過站上好像沒看到有這樣子的問題發生.......
win139
可愛的小學生
可愛的小學生
 
文章: 26
註冊時間: 週一 3月 21, 2005 10:08 pm

文章wsun013 » 週二 8月 01, 2006 2:51 am

嗨,
請問在開機時有跑 Hotplug 或是 udev 嗎?
kernel 2.6.15 為分水嶺, 在那之前以 hotplug 之後以 udev 做為開機hardware 偵測的工具
也許您在升級時沒一起更新?
------BEGIN GEEK CODE BLOCK------
Version: 3.12
GE d->++ s: a-- C+++>++++ UL>++++ P>++++ L++>++++ E---- W+ N@ o K- w++(+)
O- M- V? PS+++(+) PE++(+) Y-- PGP- t>--- 5? X+++ R- tv-(--) b+ DI? D+ G e++>++++
h+(!) r++(%) y*>++++
-------END GEEK CODE BLOCK-------
頭像
wsun013
快樂的大學生
快樂的大學生
 
文章: 784
註冊時間: 週二 9月 14, 2004 12:12 pm
來自: 紐西蘭

文章win139 » 週二 8月 01, 2006 10:19 am

謝謝前輩的回覆

我的kernel 是從 2.4.27-2-386 升級的
不論是升級到 2.6.8-3-686 or 2.6.8-2-686 or 2.6.8-3-386
好像都會有上述的問題

我不知道要從哪裡取得 boot log, 不然就可以貼上來給前輩參考參考了。
win139
可愛的小學生
可愛的小學生
 
文章: 26
註冊時間: 週一 3月 21, 2005 10:08 pm

Re: apt-get upgrade 之後發生了一些問題

文章win139 » 週二 8月 01, 2006 10:25 am

win139 寫:各位學長
小弟是 debian 的生手 (非新手)
依 "圖解 Debian 桌面入門" 的步驟安裝好gnome 之後
又自做主張的把 apt sources.list 中的 stable 改成 testing,
在 apt-get update -> apt-get upgrade 之後
gnome 中發生一些變化:
1. 應用程式選單並變成英文
ex. 偏好設定 -> Preferences; 系統 -> System
不過子選單倒是維持是中文的
2. xcin 裡酷音輸入法不見了

另外, 我如果升級核心 kernel-image & kernel-headers
新的核心在開機時好像無法辨識到 USB mouse & Keyboard 及 設定網卡

我搜尋過站上好像沒看到有這樣子的問題發生.......


另外,上面提到的 gnome 應用程式選單變成英文的情況,有前輩知道是怎麼一回事,或是要怎麼修正嗎?
win139
可愛的小學生
可愛的小學生
 
文章: 26
註冊時間: 週一 3月 21, 2005 10:08 pm

文章whatup » 週二 8月 01, 2006 10:26 am

win139 寫:謝謝前輩的回覆

我的kernel 是從 2.4.27-2-386 升級的
不論是升級到 2.6.8-3-686 or 2.6.8-2-686 or 2.6.8-3-386
好像都會有上述的問題

我不知道要從哪裡取得 boot log, 不然就可以貼上來給前輩參考參考了。

boot log 可以從 /var/log/dmesg 中取得
my blog: http://blog.twkang.net
歡迎參觀
whatup
可愛的小學生
可愛的小學生
 
文章: 44
註冊時間: 週二 2月 10, 2004 8:26 pm

文章win139 » 週二 8月 01, 2006 4:42 pm

boot log 如下
代碼: 選擇全部
Linux version 2.6.8-3-686 (root@lart) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Sat Jul 15 10:32:25 UTC 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000017ed0000 (usable)
 BIOS-e820: 0000000017ed0000 - 0000000017ee0000 (reserved)
 BIOS-e820: 0000000017ee0000 - 0000000017ee8000 (ACPI data)
 BIOS-e820: 0000000017ee8000 - 0000000017f00000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
382MB LOWMEM available.
On node 0 totalpages: 98000
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 93904 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACER                                      ) @ 0x000fe030
ACPI: RSDT (v001 ACER   S511P    0x00000001 ACER 0x00000000) @ 0x17ee0000
ACPI: FADT (v001 ACER   S511P    0x00000001 ACER 0x00000000) @ 0x17ee0028
ACPI: DSDT (v001   Acer  S511P   0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 863.990 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 380396k/392000k available (1552k kernel code, 10836k reserved, 689k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1568.76 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps:        0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 915.0541 MHz.
..... host bus clock speed is 140.0852 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4684k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0220, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6790
PnPBIOS: PnP BIOS version 1.0, entry 0xf8020:0x0, dseg 0xf0000
PnPBIOS: dev_node_info: function not supported on this system
PnPBIOS: Unable to get node info.  Aborting.
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [PILA] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:00:1f.2[D]: no GSI - using IRQ 3
ACPI: PCI interrupt 0000:00:1f.3[B]: no GSI - using IRQ 10
ACPI: PCI interrupt 0000:00:1f.4[C]: no GSI - using IRQ 5
ACPI: PCI interrupt 0000:00:1f.5[B]: no GSI - using IRQ 10
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 9 (level, low) -> IRQ 9
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4684 blocks [1 disk] into ram disk...
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 1
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8c00-0x8c07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x8c08-0x8c0f, BIOS settings: hdc:pio, hdd:DMA
hda: ST320413A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: Host Protected Area detected.
   current capacity is 39102336 sectors (20020 MB)
   native  capacity is 39102337 sectors (20020 MB)
hda: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
hdd: CRN-8241B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 642560k swap on /dev/hda5.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Real Time Clock Driver v1.12
Generic RTC Driver v1.07
hdd: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.100 (c) Dave Jones
hw_random hardware driver 1.0.0 loaded
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 9 (level, low) -> IRQ 9
e100: eth0: e100_probe: addr 0x80110000, irq 9, MAC addr 00:00:E2:3F:A2:14
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1f.2[D]: no GSI - using IRQ 3
uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
PCI: Setting latency timer of device 0000:00:1f.2 to 64
irq 3: nobody cared!
 [<c01083fa>] __report_bad_irq+0x2a/0x90
 [<c01084f0>] note_interrupt+0x70/0xb0
 [<c01087d0>] do_IRQ+0x120/0x130
 [<c0106a20>] common_interrupt+0x18/0x20
 [<c012013e>] __do_softirq+0x2e/0x80
 [<c01201b7>] do_softirq+0x27/0x30
 [<c01087ab>] do_IRQ+0xfb/0x130
 [<c0106a20>] common_interrupt+0x18/0x20
 [<c0108d6f>] setup_irq+0x7f/0xf0
 [<d89b5760>] usb_hcd_irq+0x0/0x70 [usbcore]
 [<c01088a4>] request_irq+0x84/0xd0
 [<d89b9be2>] usb_hcd_pci_probe+0x1f2/0x500 [usbcore]
 [<d89b5760>] usb_hcd_irq+0x0/0x70 [usbcore]
 [<c0160033>] flush_old_exec+0xe3/0x7d0
 [<c01b04b2>] pci_device_probe_static+0x52/0x70
 [<c01b050c>] __pci_device_probe+0x3c/0x50
 [<c01b054c>] pci_device_probe+0x2c/0x50
 [<c01f827f>] bus_match+0x3f/0x70
 [<c01f83ac>] driver_attach+0x5c/0xa0
 [<c01f88d1>] bus_add_driver+0x91/0xb0
 [<c01f8e7f>] driver_register+0x2f/0x40
 [<c01b07cc>] pci_register_driver+0x5c/0x90
 [<d882e0c2>] uhci_hcd_init+0xc2/0x141 [uhci_hcd]
 [<c01334eb>] sys_init_module+0xeb/0x220
 [<c010603b>] syscall_call+0x7/0xb
handlers:
[<d89b5760>] (usb_hcd_irq+0x0/0x70 [usbcore])
Disabling IRQ #3
uhci_hcd 0000:00:1f.2: irq 3, io base 00008880
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1f.4[C]: no GSI - using IRQ 5
uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1f.4 to 64
irq 5: nobody cared!
 [<c01083fa>] __report_bad_irq+0x2a/0x90
 [<c01084f0>] note_interrupt+0x70/0xb0
 [<c01087d0>] do_IRQ+0x120/0x130
 [<c0106a20>] common_interrupt+0x18/0x20
 [<c012013e>] __do_softirq+0x2e/0x80
 [<c01201b7>] do_softirq+0x27/0x30
 [<c01087ab>] do_IRQ+0xfb/0x130
 [<c0106a20>] common_interrupt+0x18/0x20
 [<c0108d6f>] setup_irq+0x7f/0xf0
 [<d89b5760>] usb_hcd_irq+0x0/0x70 [usbcore]
 [<c01088a4>] request_irq+0x84/0xd0
 [<d89b9be2>] usb_hcd_pci_probe+0x1f2/0x500 [usbcore]
 [<d89b5760>] usb_hcd_irq+0x0/0x70 [usbcore]
 [<c0192c65>] sysfs_create+0x85/0xe0
 [<c01b04b2>] pci_device_probe_static+0x52/0x70
 [<c01b050c>] __pci_device_probe+0x3c/0x50
 [<c01b054c>] pci_device_probe+0x2c/0x50
 [<c01f827f>] bus_match+0x3f/0x70
 [<c01f83ac>] driver_attach+0x5c/0xa0
 [<c01f88d1>] bus_add_driver+0x91/0xb0
 [<c01f8e7f>] driver_register+0x2f/0x40
 [<c01b07cc>] pci_register_driver+0x5c/0x90
 [<d882e0c2>] uhci_hcd_init+0xc2/0x141 [uhci_hcd]
 [<c01334eb>] sys_init_module+0xeb/0x220
 [<c010603b>] syscall_call+0x7/0xb
handlers:
[<d89b5760>] (usb_hcd_irq+0x0/0x70 [usbcore])
Disabling IRQ #5
uhci_hcd 0000:00:1f.4: irq 5, io base 000088c0
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using address 2
agpgart: Detected an Intel i815 Chipset.
agpgart: Maximum main memory to use for agp memory: 320M
agpgart: AGP aperture is 64M @ 0x84000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
usb 1-1: control timeout on ep0out
uhci_hcd 0000:00:1f.2: Unlink after no-IRQ?  Different ACPI or APIC settings may help.
ACPI: PCI interrupt 0000:00:1f.5[B]: no GSI - using IRQ 10
irq 10: nobody cared!
 [<c01083fa>] __report_bad_irq+0x2a/0x90
 [<c01084f0>] note_interrupt+0x70/0xb0
 [<c01087d0>] do_IRQ+0x120/0x130
 [<c0106a20>] common_interrupt+0x18/0x20
 [<c012013e>] __do_softirq+0x2e/0x80
 [<c01201b7>] do_softirq+0x27/0x30
 [<c01087ab>] do_IRQ+0xfb/0x130
 [<c0106a20>] common_interrupt+0x18/0x20
 [<c0108d6f>] setup_irq+0x7f/0xf0
 [<d8a9c880>] snd_intel8x0_interrupt+0x0/0x260 [snd_intel8x0]
 [<c01088a4>] request_irq+0x84/0xd0
 [<d8a9ee7b>] snd_intel8x0_create+0x1cb/0x590 [snd_intel8x0]
 [<d8a9c880>] snd_intel8x0_interrupt+0x0/0x260 [snd_intel8x0]
 [<d8a9f324>] snd_intel8x0_probe+0xe4/0x280 [snd_intel8x0]
 [<c0192c65>] sysfs_create+0x85/0xe0
 [<c016cd31>] dput+0x31/0x220
 [<c01b04b2>] pci_device_probe_static+0x52/0x70
 [<c01b050c>] __pci_device_probe+0x3c/0x50
 [<c01b054c>] pci_device_probe+0x2c/0x50
 [<c01f827f>] bus_match+0x3f/0x70
 [<c01f83ac>] driver_attach+0x5c/0xa0
 [<c01f88d1>] bus_add_driver+0x91/0xb0
 [<c01f8e7f>] driver_register+0x2f/0x40
 [<c01b07cc>] pci_register_driver+0x5c/0x90
 [<d882e015>] alsa_card_intel8x0_init+0x15/0x43 [snd_intel8x0]
 [<c01334eb>] sys_init_module+0xeb/0x220
 [<c010603b>] syscall_call+0x7/0xb
handlers:
[<d8a9c880>] (snd_intel8x0_interrupt+0x0/0x260 [snd_intel8x0])
Disabling IRQ #10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 45409 usecs
intel8x0: clocking to 48000
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 2, error -110
usb 1-1: new low speed USB device using address 3
usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 3, error -110
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 17
win139
可愛的小學生
可愛的小學生
 
文章: 26
註冊時間: 週一 3月 21, 2005 10:08 pm

文章win139 » 週二 8月 01, 2006 4:44 pm

在跑到
代碼: 選擇全部
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 2, error -110
usb 1-1: new low speed USB device using address 3
usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 3, error -110

時, 螢幕停頓的時間較久, 再來滑鼠跟鍵盤就沒反應了
win139
可愛的小學生
可愛的小學生
 
文章: 26
註冊時間: 週一 3月 21, 2005 10:08 pm

文章訪客 » 週三 8月 02, 2006 1:06 am

用 linux 系統最好不要超頻...
訪客
 

文章詭辮老輸 » 週六 8月 05, 2006 10:31 am

modconf set好沒有???
詭辮老輸
可愛的小學生
可愛的小學生
 
文章: 7
註冊時間: 週日 7月 23, 2006 10:08 pm
來自: HKSAR

文章win139 » 週日 8月 06, 2006 9:49 pm

Anonymous 寫:用 linux 系統最好不要超頻...


超頻??沒有啊
升級到 2.6.8-3-686 就出現這些字啦

sorry 實在不懂這跟超頻有甚麼關係
win139
可愛的小學生
可愛的小學生
 
文章: 26
註冊時間: 週一 3月 21, 2005 10:08 pm

文章win139 » 週日 8月 06, 2006 9:52 pm

詭辮老輸 寫:modconf set好沒有???


哦!?

modconf ? 要 set嗎?
我如果適用官方版的核心還要另外 set modconf??

那怎麼用 netinst 光碟安裝時不需要 set modconf??
win139
可愛的小學生
可愛的小學生
 
文章: 26
註冊時間: 週一 3月 21, 2005 10:08 pm

文章詭辮老輸 » 週一 8月 07, 2006 10:51 pm

2.6 kernel我記憶所及,USB mouse要set modconf(升級Xorg時發現的),USB keyboard好像已經好。

netist自己沒有用過幫不了你
詭辮老輸
可愛的小學生
可愛的小學生
 
文章: 7
註冊時間: 週日 7月 23, 2006 10:08 pm
來自: HKSAR

文章win139 » 週二 8月 08, 2006 12:04 pm

詭辮老輸 寫:2.6 kernel我記憶所及,USB mouse要set modconf(升級Xorg時發現的),USB keyboard好像已經好。

netist自己沒有用過幫不了你


不知道,因為 跑到那邊的時候, USB 鍵盤怎麼 key 都沒有反應,而光學滑鼠則是連滑鼠底下的紅光都不見了,所以我才覺得是USB 的問題
win139
可愛的小學生
可愛的小學生
 
文章: 26
註冊時間: 週一 3月 21, 2005 10:08 pm

文章詭辮老輸 » 週三 8月 09, 2006 8:13 am

試一試先用ps/2 keyboard set modconf
詭辮老輸
可愛的小學生
可愛的小學生
 
文章: 7
註冊時間: 週日 7月 23, 2006 10:08 pm
來自: HKSAR

文章win139 » 週日 8月 13, 2006 9:19 pm

謝謝你關心我的問題
不過 我的電腦就是沒有ps2的接頭

他是 acer 出貨到歐洲的電腦,所以一出廠就是預設用 usb keyboard

如果有 ps2 接頭 也許我早就接了
win139
可愛的小學生
可愛的小學生
 
文章: 26
註冊時間: 週一 3月 21, 2005 10:08 pm

下一頁

回到 debian desktop

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 1 位訪客