請教Linkstation hg 更新 kernels 至 2.6 版 的問題

[lovevalen]

目前 linkstation hg 為 2.4 版

安裝步驟為以下
更新為 kernel 2.6 開始.



這個部份第一次安裝要做喔.

avr-evt 設定

wget http://hvkls.dyndns.org/downloads/lates ... .tar.gztar -C / -xvzf latest-upgradehelper.tar.gz
openlink 使用者要安裝的wget http://hvkls.dyndns.org/downloads/lates ... .tar.gztar -C / -xvzf latest-openlinkhelper.tar.gzchmod 1777 /tmp
u-Boot 安裝要做的mkdir /boot 2>/dev/nulltouch /boot/variant-uboottouch /boot/variant-ug
安裝 kernel 2.6 前要做的wget http://hvkls.dyndns.org/downloads/lates ... .tar.gztar -C / -xvzf latest-webinstaller.tar.gz
安裝 kernel 2.6 指令(最安全的方案)/usr/local/sbin/webinstaller-kernelinst.sh
安裝之後會出現以下的錯誤
HD-HGLAND19:~# /usr/local/sbin/webinstaller-kernelinst.sh
Linkstation 2.6 kernel webinstaller
http://hvkls.dyndns.org/downloads/docum ... aller.html

--> HG/HS/KuroHG/Tera with FreeLink
--> Will install into /

Starting downloads (truncation warnings and timouts resulting in error 404 can be ignored safely)...

--> Getting webinstaller...
Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-webinstaller.tar.gz'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-webinstaller.tar.gz.md5'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-webinstaller.tar.gz.md5'.

latest-webinstaller.tar.gz: OK
--> webinstaller retrieved.
--> Getting bootloader...
Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-bootloader.tar.gz'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-bootloader.tar.gz.md5'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-bootloader.tar.gz.md5'.

latest-bootloader.tar.gz: OK
--> bootloader retrieved.
--> Getting kernel...
Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-kernel.tar.gz'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-kernel.tar.gz.md5'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-kernel.tar.gz.md5'.

latest-kernel.tar.gz: OK
--> kernel retrieved.
--> Getting modules...
Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-modules.tar.gz'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-modules.tar.gz.md5'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-modules.tar.gz.md5'.

latest-modules.tar.gz: OK
--> modules retrieved.
--> Getting upgradehelper...
Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-upgradehelper.tar.gz'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-upgradehelper.tar.gz.md5'.


Continued download failed on this file, which conflicts with `-c'.
Refusing to truncate existing file `latest-upgradehelper.tar.gz.md5'.

latest-upgradehelper.tar.gz: OK
--> upgradehelper retrieved.
Reading Package Lists... Done
Building Dependency Tree... Done
The following NEW packages will be installed:
module-init-tools
0 upgraded, 1 newly installed, 0 to remove and 34 not upgraded.
Need to get 84.9kB of archives.
After unpacking 328kB of additional disk space will be used.
Get:1 ftp://debian.linux.org.tw stable/main module-init-tools 3.3-pre4-2 [84.9kB]
Fetched 84.9kB in 0s (172kB/s)
(Reading database ... 8967 files and directories currently installed.)
Unpacking module-init-tools (from .../module-init-tools_3.3-pre4-2_powerpc.deb) ...
dpkg-divert: rename involves overwriting `/sbin/depmod.modutils' with
different file `/sbin/depmod', not allowed
dpkg: error processing /var/cache/apt/archives/module-init-tools_3.3-pre4-2_powerpc.deb (--unpack):
subprocess pre-installation script returned error exit status 2
Errors were encountered while processing:
/var/cache/apt/archives/module-init-tools_3.3-pre4-2_powerpc.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

FATAL: Can't install Debian's module-init-tools, or lm-sensors (Tera only)
--> You need to take care of that yourself:
apt-get --reinstall install wget diff modutils module-init-tools # all systems
apt-get --reinstall install lm-sensors # Tera only
--> Then run this script again.

請問我該如何去解決這問題