如何指定eth0或eth1播號上網呢?

[THQ]

裝了2片網卡,但如何指定eth0或eth1播號上網呢?
thx

[jesse.sung]

如果設定檔是系統產生出來的，可以看看 /etc/ppp/peers/provider ，裡面有指定介面喔。

[THQ]

/etc/ppp/peers/provider 內容如下沒有看到指定介面
hide-password
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/provider"
debug
/dev/ttyS1
115200
defaultroute
noipdefault
user "xxxxxxx@hinet.net"
remotename provider
ipparam provider

還是這個
/etc/ppp/peers/dsl-provider
裡的plugin rp-pppoe.so eth1嗎

修改重播號後
eth0 Link encap:Ethernet HWaddr 00:E0:4C:49:51:56
inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:4cff:fe49:5156/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:764864991 errors:1422641 dropped:3905240 overruns:1108973 frame:0
TX packets:746794866 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2669353640 (2.4 GiB) TX bytes:1418957830 (1.3 GiB)
Interrupt:5 Base address:0xd000

eth1 Link encap:Ethernet HWaddr 00:90:CC:C2:EF:7F
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.0.0
inet6 addr: fe80::290:ccff:fec2:ef7f/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:133782 errors:0 dropped:0 overruns:0 frame:0
TX packets:106451 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:65739119 (62.6 MiB) TX bytes:10130924 (9.6 MiB)
Interrupt:10 Base address:0xe800
還是看到eth0 比較多封包在進來,eth1很少
如何知道是由eth1播號的呢

[redjoe]

/etc/network/interfaces 裡還有個設定

[THQ]

pre-up /sbin/ifconfig eth1 up 這句嗎

[dominic-y]

pppoeconf eth1
這樣去設定

[THQ]

感謝~