《問題》squid安裝一直出現錯誤訊息

[Rinoria]

各位Linux大大.....求救
我是依http://www.tn.edu.tw/sammy/squid/setup.htm的安裝步驟去安裝的
但是在"# /home/squid/bin/squid -z　產生快取目錄"這個部分一直出現下面的錯誤訊息
FATAL: Could not determine fully qualified hostname. Please set "visible_hostname"
Squid Cache (Version 2.5.STABLE2): Terminated abnorally.
CPU Usage:0.014 sedonds=0.006
Maximum Resident Size 0KB
Page fault with physical i/o:0
Aborted

是我squid.conf那個地方設錯了嗎.....一直都出現這個錯誤訊息....
請個位大大幫個

[louie]

請問在 /etc/hosts 中有設好對應的 hostname 嗎 ?

[Rinoria]

請問在 /etc/hosts 中有設好對應的 hostname 嗎 ?

127.0.0.1 NetGuru01 localhost
這是/etc/hosts中的設定

[louie]

那如果將 visible_hostname
設成 NetGuru01 呢 ??

先用 hostname -f 來查看看 FQDN (Fully Qualified Domain Name)是否正確

[Rinoria]

那如果將 visible_hostname
設成 NetGuru01 呢 ??

先用 hostname -f 來查看看 FQDN (Fully Qualified Domain Name)是否正確

利用hostname -f查出來的結果是NetGuru01
我在squid.conf的visible_hostname也設定成NetGuru01
結果錯誤訊息
parseConfigFile: line 1954 unrecognized: 'NetGuru01'
FATAL: Could not determin fully qualified hostname.
Please set 'visible_name'

或是說還有其他地方的主機名稱要另外設定而我沒設定到才會這樣?

[louie]

那可能要使用 xxx.xxx.xxx 這種格式的 hostname 了。
試看看吧，修改 /etc/hostname 及 /etc/hosts

[Rinoria]

那可能要使用 xxx.xxx.xxx 這種格式的 hostname 了。
試看看吧，修改 /etc/hostname 及 /etc/hosts

所謂的以xxx.xxx.xxx格式的hostname指的是dns嗎???
我改了儲存過後有需要重新啟動什麼程式讓他更新嗎???
改了還是出現一樣的錯話

你的有這種問題出現嗎

[louie]

要立即修改 hostname
hostname your.host.name
即可

[week]

請問一下，您linux是那個版本的?

[blueso]

我的 /etc/squid/squid.conf 裡面的 visible_hostname 隨便設都可以阿！?
只是說有error發生時網頁會出現

代碼: 選擇全部

ERROR
The requested URL could not be retrieved

While trying to retrieve the URL: http://tw.user.bid.yahoo.com/tw/show/myaucs?

The following error was encountered:

    * Access Denied.

      Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.

Your cache administrator is webmaster.
Generated Wed, 02 Feb 2005 07:14:05 GMT by hostname (squid/2.5.STABLE7)

最下面的hostname 就是在 squid.conf 設的visible_hostname

[Tetralet]

我在猜...

是不是您沒有設定 Squid 的 ACL 呢？

[Rinoria]

Squid的ACL要設定什麼???

[blueso]

方便貼一下你的設定檔嗎？
看你要不要試一下這個設定檔看能不能用，

代碼: 選擇全部

http_port 3128
icp_port 3130
hierarchy_stoplist cgi-bin ?
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY
cache_mem 40 MB
cache_dir ufs /cache1 4096 128 128
cache_dir ufs /cache2 4096 128 128
cache_dir ufs /cache3 4096 128 128
cache_dir ufs /cache4 4096 128 128
pid_filename /var/run/squid.pid

refresh_pattern ^ftp:           1440    20%     10080
refresh_pattern ^gopher:        1440    0%      1440
refresh_pattern .               0       20%     4320

acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443 563      # https, snews
acl SSL_ports port 873          # rsync
acl Safe_ports port 80          # http
acl Safe_ports port 21          # ftp
acl Safe_ports port 443 563     # https, snews
acl Safe_ports port 70          # gopher
acl Safe_ports port 210         # wais
acl Safe_ports port 1025-65535  # unregistered ports
acl Safe_ports port 280         # http-mgmt
acl Safe_ports port 488         # gss-http
acl Safe_ports port 591         # filemaker
acl Safe_ports port 777         # multiling http
acl Safe_ports port 631         # cups
acl Safe_ports port 873         # rsync
acl Safe_ports port 901         # SWAT
acl purge method PURGE
acl CONNECT method CONNECT

http_access allow all
http_access allow manager localhost
http_access deny manager
# Only allow purge requests from localhost
http_access allow purge localhost
http_access deny purge
# Deny requests to unknown ports
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
http_reply_access allow all
icp_access allow all
visible_hostname debian
never_direct allow all
coredump_dir /var/spool/squid




我的/etc/squid/squid.conf
Debian , unstable , squid 2.5.7-5
http://mi.chu.edu.tw/~mi83053/server_conf/squid.conf

[Rinoria]

請問一下，您linux是那個版本的?

我的作業系統與kernal如下
OS系統是dEBIAN 3.1 Sarge Testing....
Linux kernel:2.6.8.1(i386)

[Rinoria]

方便貼一下你的設定檔嗎？
看你要不要試一下這個設定檔看能不能用，

代碼: 選擇全部

http_port 3128
icp_port 3130
hierarchy_stoplist cgi-bin ?
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY
cache_mem 40 MB
cache_dir ufs /cache1 4096 128 128
cache_dir ufs /cache2 4096 128 128
cache_dir ufs /cache3 4096 128 128
cache_dir ufs /cache4 4096 128 128
pid_filename /var/run/squid.pid

refresh_pattern ^ftp:           1440    20%     10080
refresh_pattern ^gopher:        1440    0%      1440
refresh_pattern .               0       20%     4320

acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443 563      # https, snews
acl SSL_ports port 873          # rsync
acl Safe_ports port 80          # http
acl Safe_ports port 21          # ftp
acl Safe_ports port 443 563     # https, snews
acl Safe_ports port 70          # gopher
acl Safe_ports port 210         # wais
acl Safe_ports port 1025-65535  # unregistered ports
acl Safe_ports port 280         # http-mgmt
acl Safe_ports port 488         # gss-http
acl Safe_ports port 591         # filemaker
acl Safe_ports port 777         # multiling http
acl Safe_ports port 631         # cups
acl Safe_ports port 873         # rsync
acl Safe_ports port 901         # SWAT
acl purge method PURGE
acl CONNECT method CONNECT

http_access allow all
http_access allow manager localhost
http_access deny manager
# Only allow purge requests from localhost
http_access allow purge localhost
http_access deny purge
# Deny requests to unknown ports
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
http_reply_access allow all
icp_access allow all
visible_hostname debian
never_direct allow all
coredump_dir /var/spool/squid




我的/etc/squid/squid.conf
Debian , unstable , squid 2.5.7-5
http://mi.chu.edu.tw/~mi83053/server_conf/squid.conf

採用大大的設定檔還是有錯誤發生說
一樣是無法識別visible_hostname
parseConfigFile:line 1964 unrecognized "debian"
另外還多了一個錯誤...說我沒有建立swap的資料夾
Creating Swap Directory