我的vsftpd設定好之後，我在localhost登入，它可以成功的登入，
不過卻會有以下的資訊，不知道我哪裡有設定錯誤呢!?
- 代碼: 選擇全部
[root]@Geoge8.Net : xinetd.d# ftp localhost 2121
Connected to localhost.localdomain.
220 (vsFTPd 2.0.1)
Name (localhost:root): geoge
331 Please specify the password.
Password:
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
500 OOPS: capset
ftp: bind: Address already in use
ftp> ls
200 PORT command successful. Consider using PASV.
421 Service not available, remote server has closed connection
ftp> ls
Not connected.
而利用FlashFXP來連的話，
則是以下的訊息
- 代碼: 選擇全部
WinSock 2.0 -- OpenSSL 0.9.6b 9 Jul 2001
[R] 正在連線到 Geoge8 -> IP=xxx.xxx.xxx.xxx PORT=2121 //打馬賽克，Orz..
[R] 已連線到 Geoge8
[R] 220 (vsFTPd 2.0.1)
[R] USER geoge
[R] 331 Please specify the password.
[R] PASS (hidden)
[R] 230 Login successful.
[R] SYST
[R] 500 OOPS: capset
[R] FEAT
[R] 215 UNIX Type: L8
[R] 500 OOPS: vsf_sysutil_recv_peek
[R] REST 100
[R] 連線失敗 (連線已斷)
[R] 正在延遲 120 秒, 於重新連線嘗試第 #1 次之前
底下是我的vsftpd.conf
- 代碼: 選擇全部
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone? vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=nobody
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories. See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
chroot_local_user=NO
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
listen_port=2121
use_localtime=YES
max_clients=8
max_per_ip=2
pasv_enable=YES
pasv_min_port=65400
pasv_max_port=65420
tcp_wrappers=YES
enable_iconv=YES
local_charset=UTF-8
remote_charset=BIG5
check_shell=NO
#one_process_model=YES
#pam_service_name=vsftpd
麻煩大家幫我想想辦法鳥!!
爬了文，不過找不到我要的答案。
感謝大家!!!
