求助 samba 跟windows xp 互連問題

[lovevalen]

問題是這樣子的
有三台電腦
二台xp 一台debian linux testing
二台xp 的工作群組為home,有安裝NetBEUI 的protocol
二台xp 的共享檔都可以互看到對方

我的問題是debian 看不到其他二台xp系統
而xp 也看不到debian 系統
前面有為大大說
smbclient -L 127.0.0.1
之後出現
lovevalen:/home/lovevalen# smbclient -L 127.0.0.1
Password:
Domain=[HOME] OS=[Unix] Server=[Samba 3.0.20b-Debian]

Sharename Type Comment
--------- ---- -------
print$ Disk Printer Drivers
share Disk share folder
IPC$ IPC IPC Service (lovevalen server (Samba 3.0.20b-Debian))
ADMIN$ IPC IPC Service (lovevalen server (Samba 3.0.20b-Debian))
lp Printer Generic dot-matrix printer entry
Domain=[HOME] OS=[Unix] Server=[Samba 3.0.20b-Debian]

Server Comment
--------- -------
LOVEVALEN lovevalen server (Samba 3.0.20b-Debian)

Workgroup Master
--------- -------
HOME

________________________________________________________________
以下是我的smb.conf內容
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not many any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = HOME

# server string is the equivalent of the NT Description field
server string = %h server (Samba %v)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
; wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast


#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
; syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba-HOWTO-Collection/ServerType.html
# in the samba-doc package for details.
security = share

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = false

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes
obey pam restrictions = yes

; guest account = nobody
invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
; unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
; pam password change = no
########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
; printer admin = @ntadmin


######## File sharing ########

# Name mangling options
; preserve case = yes
; short preserve case = yes


############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
; domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
#======================= Share Definitions =======================

[homes]
comment = Home Directories
browseable = no

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
writable = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no

[printers]
comment = All Printers
browseable = no
path = /tmp
printable = yes
public = no
writable = no
create mode = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
; write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; writable = no
; locking = no
; path = /cdrom
; public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom
[share]
comment = share folder
path= /home/lovevalen/share/bt
guest ok = yes
writable = yes

[訪客]

check 一下 passwd file 是不是 存在

[lovevalen]

在debian 下
在打smbclient -L 127.0.0.1
是有要打passwd
我打了之後在是可以看見分享的東東
但xp或debian 都不能互看到對方

二台xp 可以互看到對方

[wsun013]

加個

代碼: 選擇全部

public = yes

在 share 下面吧

xp 的 firewall 關一下try try see

[訪客]

我沒開 firewall吧
我只有用卡巴斯機而已
public = yes <<<<< 這行要加在
[share] 內嗎

[lovevalen]

上一位大大
加入public = yes 之
後還是無法分享呢
我又把public =yes
上一行移除
現在 連debian 都看不到自己分享的
檔了

[wsun013]

加入之後有以root

代碼: 選擇全部

/etc/init.d/samba restart

嗎 ?

[訪客]

有丫.但還是無法看
對了
我有把你的msn加入好友
有問題在問你

[capitalm]

encrypt passwords = false
改為
encrypt passwords = true

試試看

[wsun013]

這是我的smb.conf 給您參考看看

代碼: 選擇全部

[global]

workgroup = LinGroup
server string = KNIGHT

hosts allow = 192.168.0. 127.
security = share
smb passwd file = /etc/samba/smbpasswd

dos charset = big5
unix charset = big5

[public]
path = /cvs/share
public = yes
read only=no
writable = yes



[脫線]

互相看不到的話，先查一下網路吧。
ifconfig -a
看一下訊息，我曾經有過lo消失的經驗.......