NFS疑惑

[13F]

請教各位
小弟剛學習Embedded Linux.使用SBC2410學習板
我目前安裝vm6.0+redhat9.0 在NAT與Bridged模式可以正常
外聯上網.

但是在試著更新root_file_system 到目標板sbc2410上
出現錯誤.我有把防火牆都關閉,防毒軟體也關閉. 使用Bridged 與 NAT的錯誤訊息都一樣
在linux 測試 mount 192.168.186.4:/test1 /test2 目錄複製正常. 請指點.謝謝.


--------------------------------------------------------
採用Bridged .按照eth0 的addr,bcast,mask
eth0 Link encap:Ethernet HWaddr 00:0C:29:61:C0:A3
inet addr:192.168.0.163 Bcast:192.168.0.255 Mask:255.255.255.0

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0

---------------------------------------------------------
VMWARE 採用NAT
ETH0
ADDR:192.168.186.4
mask:255.255.255.0
GATE:192.168.186.2

VMnet8
Gateway IP:192.168.186.2
遮罩:255.255.255.0

WindowXP下
VMware Network Adapter VMnet8
IP:192.168.186.1
遮罩:255.255.255.0

------------------------------------------------------
底下是目標板sbc2410透過rs232終端機傳遞回的訊息.
Looking up port of RPC 100003/2 on 192.168.186.4
RPC: sendmsg returned error 101
portmap: RPC call returned error 101
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.186.4
RPC: sendmsg returned error 101
portmap: RPC call returned error 101
Root-NFS: Unable to get mountd port number from server, using default
RPC: sendmsg returned error 101
mount: RPC call returned error 101
Root-NFS: Server returned error -101 while mounting /work/kaise_root
VFS: Unable to mount root fs via NFS, trying floppy.

[hiwu.tw]

在VMware下，不要用NAT。用bridge mode。

[13F]

感謝指導.確實要用bridged mode.
另外已找出問題.PC ip沒有依照sbc2410板預設ip值.造成sbc2410
mount不到 PC端NFS分享的目錄..


-----------------------------------------------------
今天照著手冊步驟,在make zImage出現錯誤
請教這底下的訊息可能是哪裡的問題?謝謝.

arm-linux-gcc -D__KERNEL__ -I/work/Kaise_linux/include -Wall -Wstrict-prototypes -Wno-trigraphs -Os -mapcs -fno-strict-aliasing -fno-common -fno-common -pipe -mapcs-32 -march=armv4 -mtune=arm9tdmi -mshort-load-bytes -msoft-float -DKBUILD_BASENAME=vc_screen -c -o vc_screen.o vc_screen.c
arm-linux-gcc -D__KERNEL__ -I/work/Kaise_linux/include -Wall -Wstrict-prototypes -Wno-trigraphs -Os -mapcs -fno-strict-aliasing -fno-common -fno-common -pipe -mapcs-32 -march=armv4 -mtune=arm9tdmi -mshort-load-bytes -msoft-float -DKBUILD_BASENAME=consolemap -c -o consolemap.o consolemap.c
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o conmakehash conmakehash.c
make[3]: gcc: Command not found
make[3]: *** [conmakehash] Error 127
make[3]: Leaving directory `/work/Kaise_linux/drivers/char'
make[2]: *** [first_rule] Error 2
make[2]: Leaving directory `/work/Kaise_linux/drivers/char'
make[1]: *** [_subdir_char] Error 2
make[1]: Leaving directory `/work/Kaise_linux/drivers'
make: *** [_dir_drivers] Error 2
[root@localhost Kaise_linux]#

[launcelot]

請問您說pc端的ip與板子的預設ip不一樣是什麼意思
因為小弟也卡在這問題有數天了
請問如何查看板子的預設ip?

另外如果有預設IP的話~
那bootargs所設定的是否會相沖?