摩托學園討論區

這是一個開放的園地，竭誠歡迎您的光臨！

跳到內容

[不妙] 無意間買到不被支援的SD讀卡機

如果您覺得您的問題不屬於 debian desktop 或是 debian server 版的範圍內，請在這裡發問。

版主: mufa

發表回覆

[不妙] 無意間買到不被支援的SD讀卡機

文章由 訪客 » 週五 12月 21, 2007 10:58 pm

晶片為Moai MA8121 C2 022A-0713A688470.1
dmesg出現以下訊息
不知各位有沒有什麼建議？
感謝～

usb 4-4: new high speed USB device using ehci_hcd and address 5
usb 4-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access USB 2.0 SD/MMC Reader PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 1987584 512-byte hardware sectors (1018 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 1987584 512-byte hardware sectors (1018 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987456
Buffer I/O error on device sda, logical block 248432
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987456
Buffer I/O error on device sda, logical block 248432
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987456
Buffer I/O error on device sda, logical block 248432
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 8
Buffer I/O error on device sda, logical block 1
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987576
Buffer I/O error on device sda, logical block 248447
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987576
Buffer I/O error on device sda, logical block 248447
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987576
Buffer I/O error on device sda, logical block 248447
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987576
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987576
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987576
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987520
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987568
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987576
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987576
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1986876
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1986876
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1986880
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1986876
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1986880
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 60
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 64
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 60
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 64
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 60
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 64
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987076
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987076
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987076
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987076
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987076
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987076
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987012
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987016
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987068
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987072
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987076
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1987076
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 60
sd 0:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 64
訪客
 
回頂端

文章由 訪客 » 週五 12月 21, 2007 11:05 pm

MA8121 應該有支援才對，建議換個 kernel 版本。
訪客
 
回頂端

文章由 訪客 » 週日 12月 23, 2007 9:11 am

謝謝訪客兄的回覆
我試了2.6.18與2.6.22均無法成功使用
不過2.6.18的錯誤訊息不太一樣：

Vendor: USB 2.0 Model: SD/MMC Reader Rev:
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 1987584 512-byte hdwr sectors (1018 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 1987584 512-byte hdwr sectors (1018 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 1:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987456
printk: 220 messages suppressed.
Buffer I/O error on device sda, logical block 248432
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987456
Buffer I/O error on device sda, logical block 248432
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987456
Buffer I/O error on device sda, logical block 248432
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987576
Buffer I/O error on device sda, logical block 248447
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987576
Buffer I/O error on device sda, logical block 248447
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987576
Buffer I/O error on device sda, logical block 248447
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987576
Buffer I/O error on device sda, logical block 248447
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987576
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987576
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987520
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987568
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987576
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1987576
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985529
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985529
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985530
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985529
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985753
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985753
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985754
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985753
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985753
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985754
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985753
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985753
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985754
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985697
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985745
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985746
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985753
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985753
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1985754
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
printk: 231 messages suppressed.
Buffer I/O error on device sda1, logical block 0
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 250
sd 1:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 249
訪客
 
回頂端

文章由 訪客 » 週一 12月 24, 2007 8:12 am

似乎現有的Debian核心都不支援
小弟不太會自編核心
大家是否知道哪裡有相容於debian的deb可用？
感謝～

註：我用過ubuntu gusty的vmlinuz-2.6.22-14-generic，結果開不了機...
訪客
 
回頂端

文章由 訪客 » 週一 12月 24, 2007 8:31 am

剛試過B2D的2.6.23，錯誤訊息相同...
訪客
 
回頂端

文章由 訪客 » 週一 12月 24, 2007 10:34 pm

我的朋友在ubuntu 7.10上可以正確使用這支讀卡機
但Debian就是不行，我試過其他Debian的電腦，都是一樣... :crying:
煩請大家再多給點建議
謝謝
訪客
 
回頂端

文章由 訪客 » 週二 12月 25, 2007 12:06 am

Anonymous 寫:我的朋友在ubuntu 7.10上可以正確使用這支讀卡機

是同一支還是同型號不同支？

1. 我懷疑你的讀卡機根本是壞的
2. 如果沒壞，參考 Ubuntu kernel config 編 kernel 吧。
訪客
 
回頂端

文章由 Palatis » 週二 12月 25, 2007 7:19 am

我覺得可能讀卡機或卡有問題.
Palatis
 
回頂端

文章由 訪客 » 週二 12月 25, 2007 8:02 am

感謝兩位訪客兄的回覆：
同一支讀卡機裝同樣的SD卡可以在我朋友的ubuntu 7.10上正確讀寫（windows亦是）
SD是正常的，我用別的讀卡機和數位相機都可以正確使用

我已經在試著編核心了
不過還弄不太起來，有好消息再跟大家說
訪客
 
回頂端

文章由 訪客 » 週二 12月 25, 2007 10:13 am

抱歉
再請教大家一下
要驅動Moai MA8121 C2 022A-0713A688470.1
請問是在核心config中的哪個選項呢?我找不到呀~
感謝~
訪客
 
回頂端

文章由 訪客 » 週四 12月 27, 2007 6:08 pm

大家好，編核心果然不順利～ :-(

小弟的步驟如下：
下載http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.23.12.tar.bz2
解開後放到/usr/src/之下，並連結為/usr/src/linux
make menuconfig，選好各個選項後下指令：
make-kpkg binary --rootcmd=fakeroot --revision=20071227 --append-to-version=-try
編完之後會生出幾個檔案：
linux-headers-2.6.23.12-try_20071227_i386.deb
linux-image-2.6.23.12-try_20071227_i386.deb
linux-manual-2.6.23.12-try_20071227_all.deb
linux-source-2.6.23.12-try_20071227_all.deb

接著我
dpkg -i linux-image-2.6.23.12-try_20071227_i386.deb
核心裝好了，但是並沒有/boot/initrd.img-2.6.23.12-try
於是我用下面指令自己生了一個
mkinitramfs -o /boot/initrd.img-2.6.23.12-try 2.6.23.12-try

接下來在/etc/lilo.conf加上二段（分別測試要不要initrd這個參數）

image=/boot/vmlinuz-2.6.23.12-try
label="23-12-initrd"
initrd=/boot/initrd.img-2.6.23.12-try
read-only
vga=791

image=/boot/vmlinuz-2.6.23.12-try
label="23-12-noninitrd"
append = "init=/sbin/bootchartd"
read-only
vga=791

接著下lilo指令，過程沒有錯誤～
重新開機之後，這兩種情形分別出現不同的錯誤：

（1）「23-12-initrd」的開機失敗訊息
run-init: nuking initramfs contentsL Directory not empty
Kernel panic - not syncing: Attempted to kill init!

（2）「23-12-noninitrd」的開機失敗訊息
List of all partitions:
No file system could mount root, tried:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,6)

總之，新編好的核心就是開不了機啦
不知道各位前輩有沒有看出小弟什麼步驟是弄錯的？
感謝～
訪客
 
回頂端

文章由 訪客 » 週日 12月 30, 2007 10:18 pm

沒辦法
這幾天核心一直編不起來
就算套用Debian核心套件裡的config一樣開不了機
我也套用過Ubuntu核心的config去重編，而結果和直接裝ubuntu核心deb的結果一樣，開機時畫面一片黑

所以再post版上來請教一下大家其他問題
我發現這支讀卡機在不插入SD卡時，dmesg裡顯示的訊息是正常的

usb 4-4: new high speed USB device using ehci_hcd and address 6
usb 4-4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning


不過一旦在這支讀卡機裡插上SD卡，錯誤訊息就不斷冒出來了

usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access USB 2.0 SD/MMC Reader PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: [sda] Attached SCSI removable disk
sd 3:0:0:0: [sda] 1987584 512-byte hardware sectors (1018 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sda] Assuming drive cache: write through
sd 3:0:0:0: [sda] 1987584 512-byte hardware sectors (1018 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 3:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 8
printk: 360 messages suppressed.
Buffer I/O error on device sda, logical block 1
sd 3:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 16
Buffer I/O error on device sda, logical block 2
Buffer I/O error on device sda, logical block 3
Buffer I/O error on device sda, logical block 4
sd 3:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 8
Buffer I/O error on device sda, logical block 1
sd 3:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1985529
Buffer I/O error on device sda1, logical block 1985280
Buffer I/O error on device sda1, logical block 1985281
Buffer I/O error on device sda1, logical block 1985282
Buffer I/O error on device sda1, logical block 1985283
Buffer I/O error on device sda1, logical block 1985284
sd 3:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1985529
sd 3:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1985530
sd 3:0:0:0: [sda] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_RETRY
end_request: I/O error, dev sda, sector 1985529

對了
SD卡本身是正常的，我插入電腦內建的讀卡機裡時，dmesg可以正確抓到並使用
mmc0: card b368 removed
mmc0: new SD card at address b368
mmcblk0: mmc0:b368 SDC 993792KiB
mmcblk0: p1


不知道針對這個奇怪的情形
大家的判斷和意見是？謝謝大家～
訪客
 
回頂端

文章由 訪客 » 週日 12月 30, 2007 10:19 pm

對了
這支讀卡機標榜支援 SDHC，而且還說是 150X
不知道這個有沒有關係 :-?
再次謝謝各位
訪客
 
回頂端

文章由 企鵝狂 » 週日 12月 30, 2007 10:32 pm

也許跟主機板的晶片有關系
還有拜託不要在po重複又很長的錯誤訊息了
http://news.bbc.co.uk/1/hi/world/asia-pacific/country_profiles/1285915.stm


Country profile: Taiwan
Map of Taiwan
Taiwan is the island which has for all practical purposes been independent for half a century, but which China regards as a rebel region that must be reunited with the mainland - by force if necessary.
企鵝狂
活潑的高中生
活潑的高中生
 
文章: 477
註冊時間: 週三 3月 31, 2004 11:13 am
來自: 台灣共和國
回頂端

文章由 訪客 » 週一 12月 31, 2007 10:07 pm

感謝企鵝狂前輩的回覆
抱歉之前post了太多重複的東西
關於主機板晶片的問題，我想應該不是
我用ubuntu的Live CD開這台電腦，可以正確讀寫這支讀卡機
dmesg訊息如下：（Linux ubuntu 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 GNU/Linux）
[ 137.852000] usb 4-4: new high speed USB device using ehci_hcd and address 5
[ 138.696000] usb 4-4: configuration #1 chosen from 1 choice
[ 138.920000] usbcore: registered new interface driver libusual
[ 139.076000] Initializing USB Mass Storage driver...
[ 139.076000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 139.076000] usb-storage: device found at 5
[ 139.076000] usb-storage: waiting for device to settle before scanning
[ 139.076000] usbcore: registered new interface driver usb-storage
[ 139.076000] USB Mass Storage support registered.
[ 144.076000] usb-storage: device scan complete
[ 144.076000] scsi 2:0:0:0: Direct-Access USB 2.0 SD/MMC Reader PQ: 0 ANSI: 0 CCS
[ 144.080000] SCSI device sdb: 1987584 512-byte hdwr sectors (1018 MB)
[ 144.080000] sdb: Write Protect is off
[ 144.080000] sdb: Mode Sense: 03 00 00 00
[ 144.080000] sdb: assuming drive cache: write through
[ 144.080000] SCSI device sdb: 1987584 512-byte hdwr sectors (1018 MB)
[ 144.080000] sdb: Write Protect is off
[ 144.080000] sdb: Mode Sense: 03 00 00 00
[ 144.080000] sdb: assuming drive cache: write through
[ 144.080000] sdb: sdb1
[ 144.084000] sd 2:0:0:0: Attached scsi removable disk sdb
[ 144.084000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 144.332000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!


我猜
或許和哪個模組沒有被自動載入有關？
不知道大家的看法是？
謝謝大家～
訪客
 
回頂端
下一頁
發表回覆

回到 debian misc

誰在線上

正在瀏覽這個版面的使用者：沒有註冊會員 和 1 位訪客

POWERED_BY
正體中文語系由 竹貓星球 維護製作