[問題] 這算是有抓到嗎?

[alleluia]

我需要抓的硬體是 3c420 USB HomeConnect
我必須使用它來連上網路

以下是 dmesg的內容 usb 的某段訊息
--- dmesg Begin ---
lp0: using parport0 (polling).
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:04.2
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB device 2 (vend/prod 0x506/0x4200) is not claimed by any active driver.
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
CDCEther.c: CDCEther.c: v0.98.5 22 Sep 2001 Brad Hards and another
usb.c: registered new driver CDCEther
usb.c: registered new driver usbnet
solo1: version v0.19 time 10:28:35 Apr 14 2002
PCI: Found IRQ 10 for device 00:0b.0

--- dmesg END ---

以下是 /proc/bus/usb/devices 的完整內容
--- /proc/bus/usb/devices Begin ---

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0506 ProdID=4200 Rev= 0.06
S: Manufacturer=3Com Corporation
S: Product=3Com 3C420 HomeConnect(tm) 10M USB Phoneline Adapter
S: SerialNumber=00010332AF59
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 32ms

--- /proc/bus/usb/devices END ---

以下是 /proc/bus/usb/drivers 的完整內容
--- /proc/bus/usb/drivers Begin---

usbdevfs
hub
keyboard
CDCEther
usbnet
96-111: hiddev
hid

--- /proc/bus/usb/drivers END ---

以下是 /proc/interrupts 完整內容
--- /proc/interrupts Begin ---

CPU0
0: 156910 XT-PIC timer
1: 4238 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 66 XT-PIC tmscsim
8: 3 XT-PIC rtc
9: 61 XT-PIC usb-uhci
10: 0 XT-PIC ESS Solo1
14: 74236 XT-PIC ide0
NMI: 0
LOC: 156870
ERR: 0
MIS: 0

--- /proc/interrupts END ---

以下是我執行 lsusb 後的完整訊息
-- # lsusb Begin ---

Bus 001 Device 001: ID 0000:0000 Virtual Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000 Virtual
idProduct 0x0000 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 2 USB UHCI Root Hub
iSerial 1 d400
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 255
Language IDs: (length=4)
0000 (null)((null))

Bus 001 Device 002: ID 0506:4200 3Com Corp.
Language IDs: none (cannot get min. string descriptor; got len=-1, error=84:Invalid or incomplete multibyte or wide character)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0506 3Com Corp.
idProduct 0x4200
bcdDevice 0.06
iManufacturer 2
iProduct 3
iSerial 1
bNumConfigurations 1
cannot get config descriptor 0, Invalid or incomplete multibyte or wide character (84)
Language IDs: none (cannot get min. string descriptor; got len=-1, error=84:Invalid or incomplete multibyte or wide character)

-- # lsusb END ---

[alleluia]

我要再怎樣作才能讓它與linux 互相認識 溝通呢?

[moto]

看起來應該是抓到了... alleluia 兄 出了甚麼問題呢？

[alleluia]

因為找不到它被alias 到什們名字去了
/etc/network/interface 裡頭只有 lo , 它(3c420)很頑皮的不知道躲那去了
去 /etc/modules.conf 直接給它 在重新reload 一次 module 也不見它出現

[alleluia]

各位大大 我弄了整個下午 還是不行
Module Size Used by Not tainted
mousedev 3744 1
hid 18784 0 (unused)
nls_cp950 98432 12 (autoclean)
esssolo1 25504 0
gameport 1276 0 [esssolo1]
soundcore 3204 4 [esssolo1]
CDCEther 7872 0 (unused)
usbnet 7208 0 (unused)
keybdev 1664 0 (unused)
usbkbd 2848 0 (unused)
input 3040 0 [mousedev hid keybdev usbkbd]
usb-uhci 20676 0 (unused)
usbcore 48000 1 [hid CDCEther usbnet usbkbd usb-uhci]

以上是 lsmod 的結果
我是認為有抓到該硬體的模組 CDCEther
可是怎會是 unused

我又去在 /etc/modutils/alias 中加了一行
alias usb0 CDCEther
後又 #update-module
結果還是一樣

我還可以怎樣作呢?

[moto]

.. 沒用過 usb 的網卡.. ( 這是網卡吧.. ) .. 下 ifconfig eth0 會有甚麼結果阿..

[alleluia]

#ifconfig eth0 up
eth0: ERROR while getting interface flags:沒有此一裝置
#ifconfig usb0 up
usb0: ERROR while getting interface flags:沒有此一裝置

它會出現這般訊息

[moto]

各位大大 我弄了整個下午 還是不行
Module Size Used by Not tainted
mousedev 3744 1
hid 18784 0 (unused)
nls_cp950 98432 12 (autoclean)
esssolo1 25504 0
gameport 1276 0 [esssolo1]
soundcore 3204 4 [esssolo1]
CDCEther 7872 0 (unused)
usbnet 7208 0 (unused)
keybdev 1664 0 (unused)
usbkbd 2848 0 (unused)
input 3040 0 [mousedev hid keybdev usbkbd]
usb-uhci 20676 0 (unused)
usbcore 48000 1 [hid CDCEther usbnet usbkbd usb-uhci]

以上是 lsmod 的結果
我是認為有抓到該硬體的模組 CDCEther
可是怎會是 unused

我又去在 /etc/modutils/alias 中加了一行
alias usb0 CDCEther
後又 #update-module
結果還是一樣

我還可以怎樣作呢?

如果是在 /etc/modules.conf 加入

代碼: 選擇全部

alias eth0 CDCEther


呢..