[問題]CUPS問題搞不定

如果您覺得您的問題不屬於 debian desktop 或是 debian server 版的範圍內,請在這裡發問。

版主: mufa

[問題]CUPS問題搞不定

文章walter » 週五 4月 16, 2004 10:23 am

小弟最近使用了一台舊型的印表機 EPSON stylus color 1500
要使用CUPS這tool來做列印
驅動程式設定為
$lpadmin -p EPSON -E -v parallel:/dev/lp0 -m stcolor.ppd

而做一下簡單的測試列印
$ lp -d EPSON file
request id is EPSON-21 (1 file(s))
再來就如同石沈大海
印表機完全沒有反應 :-?

可是使用
$cat file > /dev/lp0
確又可以印出東西來

而在之前剛裝cups時 使用
$ lp -d EPSON file
request id is EPSON-2 (1 file(s))
是有反應的
但是至從我幫cups重新restart之後就不能使用了~@_@
$/etc/init.d/cups restart

而/var/log/cups/error_log 內容如下
I [16/Apr/2004:09:25:02 +0800] Loaded configuration file "/etc/cups/cupsd.conf"
I [16/Apr/2004:09:25:02 +0800] Configured for up to 100 clients.
I [16/Apr/2004:09:25:02 +0800] Allowing up to 100 client connections per host.
I [16/Apr/2004:09:25:02 +0800] Full reload is required.
I [16/Apr/2004:09:25:02 +0800] LoadPPDs: Read "/etc/cups/ppds.dat", 1526 PPDs...
I [16/Apr/2004:09:25:03 +0800] LoadPPDs: No new or changed PPDs...
I [16/Apr/2004:09:25:03 +0800] Full reload complete.
I [16/Apr/2004:09:25:29 +0800] Adding start banner page "none" to job 24.
I [16/Apr/2004:09:25:29 +0800] Adding end banner page "none" to job 24.
I [16/Apr/2004:09:25:29 +0800] Job 24 queued on 'EPSON' by 'root'.
E [16/Apr/2004:09:25:29 +0800] Unable to convert file 0 to printable format for job 24!
I [16/Apr/2004:09:25:29 +0800] Hint: Do you have ESP Ghostscript installed?
I [16/Apr/2004:09:25:29 +0800] Hint: Try setting the LogLevel to "debug".
E [16/Apr/2004:09:25:45 +0800] print_job: resource name '/printers/EPSON_1500' no good!
I [16/Apr/2004:09:25:48 +0800] Adding start banner page "none" to job 25.
I [16/Apr/2004:09:25:48 +0800] Adding end banner page "none" to job 25.
I [16/Apr/2004:09:25:48 +0800] Job 25 queued on 'EPSON1500' by 'root'.
I [16/Apr/2004:09:25:48 +0800] Started filter /usr/lib/cups/filter/texttops (PID 1135) for job 25.
I [16/Apr/2004:09:25:48 +0800] Started filter /usr/lib/cups/filter/pstops (PID 1136) for job 25.
I [16/Apr/2004:09:25:48 +0800] Started filter /usr/lib/cups/filter/foomatic-rip (PID 1137) for job 25.
I [16/Apr/2004:09:25:48 +0800] Started backend /usr/lib/cups/backend/parallel (PID 1138) for job 25.
E [16/Apr/2004:09:25:48 +0800] PID 1137 stopped with status 22!
I [16/Apr/2004:09:25:48 +0800] Hint: Try setting the LogLevel to "debug" to find out more.
I [16/Apr/2004:09:56:01 +0800] Loaded configuration file "/etc/cups/cupsd.conf"
I [16/Apr/2004:09:56:01 +0800] Configured for up to 100 clients.
I [16/Apr/2004:09:56:01 +0800] Allowing up to 100 client connections per host.
I [16/Apr/2004:09:56:01 +0800] Full reload is required.
I [16/Apr/2004:09:56:02 +0800] LoadPPDs: Read "/etc/cups/ppds.dat", 1526 PPDs...
I [16/Apr/2004:09:56:03 +0800] LoadPPDs: No new or changed PPDs...
I [16/Apr/2004:09:56:03 +0800] Full reload complete.
I [16/Apr/2004:09:57:46 +0800] Adding start banner page "none" to job 45.
I [16/Apr/2004:09:57:46 +0800] Adding end banner page "none" to job 45.
I [16/Apr/2004:09:57:46 +0800] Job 45 queued on 'EPSON' by 'root'.
E [16/Apr/2004:09:57:46 +0800] Unable to convert file 0 to printable format for job 45!
I [16/Apr/2004:09:57:46 +0800] Hint: Do you have ESP Ghostscript installed?
I [16/Apr/2004:09:57:46 +0800] Hint: Try setting the LogLevel to "debug".


ps:小弟的使用 2.4.21 的kernel
cups verson 1.1.20
ps2:cups 會使用到 gostscript嗎??
walter
walter
可愛的小學生
可愛的小學生
 
文章: 1
註冊時間: 週四 4月 15, 2004 1:56 pm
來自: 台北

re:[問題]CUPS問題搞不定

文章granziliao » 週五 4月 16, 2004 11:03 am

apt-get install gs-esp cupsys-driver-gimpprint-*
然後到http://127.0.0.1:631 設定
凡發生之事必合理
頭像
granziliao
可愛的小學生
可愛的小學生
 
文章: 99
註冊時間: 週三 6月 18, 2003 9:23 am
來自: 板橋後埔


回到 debian misc

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 1 位訪客