嗯...我可不可以問...?關於Debian

[高木 碁伸駿]

我通過Knoppix來裝Debian

我想用Debian來製作一個Media Center PC

http://freevo.sourceforge.net/
Freevo是我找到的計劃
它可以在tty1的情況下啟動

http://viz.aset.psu.edu/ga5in/MediaCenter.html
這是我找到的Reference Page
我是從digital video recorder開始做的

可是當我試著要啟動Freevo時
Termial告訴我少了一些檔案
所以我無法啟動Freevo

我等一下再把詳細的錯誤回報貼上來

這會不會跟Knoppix有什麼關係...?
希望大家可以一起幫忙
拜託>_<!!!

[高木 碁伸駿]

root@MX-Launcher:~# freevo

Error: freevo.conf not found

Freevo is not completely configured to start
The configuration is based on three files. This may sound oversized, but this
way it's easier to configure.

First Freevo loads a file called 'freevo.conf'. This file will be generated by
calling 'freevo setup'. Use 'freevo setup --help' to get information
about the parameter. Based on the informations in that file, Freevo will guess
some settings for your system. This takes place in a file called
'freevo_config.py'. Since this file may change from time to time, you should
not edit this file. After freevo_config.py is loaded, Freevo will look for a file
called 'local_conf.py'. You can overwrite the variables from 'freevo_config.py'
in here. There is an example for 'local_conf.py' called 'local_conf.py.example'
in the Freevo distribution.

If you need more help, use the internal webserver to get more informations
how to setup Freevo. To do this, you need to set
WWW_USERS = { 'username' : 'password' }
in your local_conf.py and then you can access the doc at
http://localhost:8080/help/

The location of freevo_config.py is /usr/share/freevo/freevo_config.py
Freevo searches for freevo.conf and local_conf.py in the following locations:
.
/root/.freevo
/etc/freevo
/usr/local/etc/freevo

root@MX-Launcher:~#

[Tetralet]

我沒玩過 Freevo，
不過...

Error: freevo.conf not found

看來似乎是設定檔沒找到...