[問題]Debian下使用cdrecord -scanbus的問題

[petersho]

/etc/modules 中加入了ide-scsi
lilo.conf 中也加入了append="ide-scsi=/dev/hdc"

不過好像還是找不到燒路機

debian:~# cdrecord -scanbus
Cdrecord-Clone 2.01a29 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J顤g Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.

cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
cdrecord:
cdrecord: For more information, install the cdrtools-doc
cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup .

[kanru]

核心參數好像反了
用 hdc=ide-scsi 試試看

[petersho]

核心參數是照Debian無痛起步書上寫的..

似乎是kernel-2.4.18-bf2.4裡面預設沒有包含sr_mod這項,
我把kernel升級到 2.4.26-1-k7就沒問題了...

[訪客]

我自己提供失敗嘗試的經驗，如果網友有用2.6以上核心，
因為核心本身已經支援ide介面的燒錄機，不用模擬成scsi裝置，
所以cdrecord --scanbus會出現找不到的現象。

ps.我是中級菜鳥，如有錯誤請指正，謝謝

[kanru]

有的有的
用 cdrecord dev=ATAPI --scanbus 即可找到
同樣的如果要直接以 ATAPI 驅動程式燒錄的話
用 cdrecord dev=ATAPI:0,1,0 cd.iso 就可以了
(0,1,0 的數字是光碟機的編號吧，scanbus 可以看到)