kernel: 2.6.8-2-686
hdd: hda, hdb 都是 Western Digital 80GB 7200RPM 8MB buffer
soft raid: md10 是 hda10, hdb10 做出來的 raid 1，兩個都是 60 GB
chip: 我不曉得怎麼遠端看 ^^'
數字看起來好像還不錯?
- 代碼: 選擇全部
literature:/home/bbs# hdparm -Tt /dev/hda
/dev/hda:
Timing cached reads: 1352 MB in 2.00 seconds = 675.77 MB/sec
Timing buffered disk reads: 168 MB in 3.01 seconds = 55.79 MB/sec
literature:/home/bbs# hdparm -Tt /dev/hdb
/dev/hdb:
Timing cached reads: 1360 MB in 2.00 seconds = 679.76 MB/sec
Timing buffered disk reads: 168 MB in 3.01 seconds = 55.82 MB/sec
literature:/home/bbs# hdparm -Tt /dev/md10
/dev/md10:
Timing cached reads: 1352 MB in 2.00 seconds = 676.10 MB/sec
Timing buffered disk reads: 158 MB in 3.01 seconds = 52.57 MB/sec
- 代碼: 選擇全部
literature:/home/bbs# hdparm -i /dev/hda
/dev/hda:
Model=WDC WD800JB-00JJA0, FwRev=05.01C05, SerialNo=WD-WCAM94613195
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=66
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=off
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
