[分享] 無線網路卡驅動!

[descent]

ndiswrapper -l

pcilib: Cannot open /proc/bus/pci/01/00.0
Unable to read 64 bytes of configuration space.Installed ndis drivers:
net8180 driver present

debian / kernel 2.4.26-1-586tsc
Mobile Pentium MMX 266

WL-1000R relteck 8180

這樣有成功驅動嗎？

[yenjinc]

看樣子net8180 driver present
ndiswrapper是已經把drivers安裝成功了

不過
pcilib: Cannot open /proc/bus/pci/01/00.0
Unable to read 64 bytes of configuration space.
可能是在驅動硬體時,有發生問題...

測試看看:
modprobe ndiswrapper
然後記得修改一下/etc/network/interfaces
接著/etc/init.d/networking restart

看看無線網路通不通....
如果不通,就表示在驅動硬體時發生問題.....

[stevenyu]

guys,need serious help here

I used to be able to get ndiswrapper working in both debian and MDK, but now I am having trouble

I am using the wg311v2 wifi NIC from netgear, I have the ndiswrapper installed alright, can load the windows driver (do you guy use xp or 98 wifi driver, i use xp).

The problem is the iwconfig doesn't seems to be taken any parameters I am putting in

say

iwconfig wlan0 essid myessid

when i do iwconfig, it still shows the essid is off/any

can someone help me please

[訪客]

感謝 提供 這樣的solution
不過 我打算到該網頁時, 好像 沒有 driver 了耶(變成shopping store),
那裡還有driver 呢??或是該到哪抓(e.g., intel) 哪種dirver呢?
謝謝

...
3.
抓Intel 2100 3B的Windows Drivers
http://ndiswrapper.sourceforge.net/supp ... psets.html
...

[訪客]

Guys I got my problem solved, it turn out my NIC or AP's WEP security have to be set in OPEN mode instead of the common RESTRICTED mode

[yenjinc]

感謝 提供 這樣的solution
不過 我打算到該網頁時, 好像 沒有 driver 了耶(變成shopping store),
那裡還有driver 呢??或是該到哪抓(e.g., intel) 哪種dirver呢?
謝謝

this
http://ndiswrapper.sourceforge.net/phpw ... c09065d88f

and this
http://ndiswrapper.sourceforge.net/

[訪客]

試著按照這篇文章 驅動 centrino 上網, 前幾天 成功的連上網路.
不過今天要用無線上網時發現 無線 的部份 連不上網路.
我試了 lsmod | grep ipw2100

代碼: 選擇全部

ipw2100               146124  0
firmware_class         10176  1 ipw2100
ieee80211              36452  1 ipw2100


and
dmesg | grep ipw

代碼: 選擇全部

ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 1.0.4
ipw2100: Copyright(c) 2003-2004 Intel Corporation
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection


發現 都有 相關的訊息.
ping 自己的 ip and 127.0.0.1 也 有動靜.
但 ping gateway就掛掉了.
請問 有可能是什麼問題呢?? (該不會燒掉了吧; ( )
或是那李有相關訊息可以參考 謝謝

ipw version 1.0.4
fw 是1.3
kernel version 2.6.8-2-686

[stevenyu]

I got a new question, I just recently installed Debian Sarge, and install the Ndiswrapper Utils from the Sarge CD, it load the windows driver without any issues.

But When I was doing

"modprobe ndiswrapper"

it give me

modprobe can't find module ndiswrapper

Look like I need some kind of link between the modeprobe and ndiswrapper, can someone help me

[Tetralet]

Try this:

代碼: 選擇全部

depmod -a

[訪客]

Try this:

代碼: 選擇全部

depmod -a

nope still no luck, still display

"modprobe can't find module ndiswrapper"

[Tetralet]

那麼，
以下這個指令的結果如何呢？

代碼: 選擇全部

find /lib/modules/`uname -r` -name "ndiswrapper*"

[stevenyu]

那麼，
以下這個指令的結果如何呢？

代碼: 選擇全部

find /lib/modules/`uname -r` -name "ndiswrapper*"

Can't find it, the pre compile ndiswrapper-utils must be for the kernel 2.6 instead of 2.4, might have to do the old method of recompiling the code or upgrade the kernel

[訪客]

您好, 謝謝您的回覆
我在安裝 make 之後 apt-get install make
在 ndiswrapper-0.11 下打 make install
出現
make -C driver
make[1]: Entering driectory `/home/net/ndiswrapper-0.11/driver'
Can't find kernel sources in /lib/modules/2.4.27-1-386/build;
give the path to kernel sources with KSRC=<path> arguments to make
make[1]: ***[prereq_check] Error 1
make[1]: Leaving directory `/home/net/ndiswrapper-0.11/driver'
make: *** [all] Error 2

我進入 /lib/modules/2.4.27-1-286 下並沒發現 build 這個 folder
該怎麼解決!?
也試過直接在之下手動建一個 build folder 結果還是失敗
謝謝.. 這兩天剛從 freebsd 轉戰 debian.. 問題不少..

[yenjinc]

===
我進入 /lib/modules/2.4.27-1-286 下並沒發現 build 這個 folder
該怎麼解決!?
也試過直接在之下手動建一個 build folder 結果還是失敗
===
那您有把build這裡連結到您的kernel source目錄嗎?
ex:
build -> /usr/src/linux/

[joce]

我進入 /lib/modules/2.4.27-1-286 下並沒發現 build 這個 folder
該怎麼解決!?
也試過直接在之下手動建一個 build folder 結果還是失敗
謝謝.. 這兩天剛從 freebsd 轉戰 debian.. 問題不少..

build 要你自己編譯的 kernel 才會有
我的經驗供您參考：

viewtopic.php?t=4248&highlight=